Looking for a "Roller" to Knurl some ML Bullets?

[KnightExtreme]

Was looking for a way (easy) to Knurl ML Bullets and found someone using this Roller (see attached)
Wondering where 1 might find something like this, it looked easy to use and maybe getting more consitency?
Anyone know where to find such a roller?
Thanks
KE

 

[E.Shell]

Looks like a knurling tool intended for use with a lathe. You should be able to find one at a machinery supply like Grainger, McMaster/Carr or MSC.

ETA:
https://www.mscdirect.com/browse/tn?searchterm=knurling tools&tg=Suggested Keywords&rd=k

 

[KnightExtreme]

Maybe something like this that has the cutting edges not just a Roller tool?

MachEI Knurling Tool Pivot Head Diamond Metric Pitches Pattern 1/2" Sq. Shank-lathe Engineering Machine Tools (Knurling Pitch 1.0 MM) - Amazon.com

MachEI Knurling Tool Pivot Head Diamond Metric Pitches Pattern 1/2" Sq. Shank-lathe Engineering Machine Tools (Knurling Pitch 1.0 MM) - Amazon.com

www.amazon.com

Being this all new for me just looking at something as 2 Files is okay but being a "novice" Simple is best for me?
KE

 

[ElDiablito]

There’s a dude on Facebook that makes a Knurling tool. It gets mixed reviews.

Two files works just fine.

Knurling Bullets

Wanted to bring this back to the top. Is there a post or does anyone have a video link of how to Knurl a bullet and what tools I would need.

www.modernmuzzleloader.com

 

[KnightExtreme]

Here is the Video of the Roller I was looking for it is not simple sniping a simple picture from it.

From what the member referred a link is what I was hoping to get a more "consistent" results. Using 2 files is mention on a few forums but thought a Roller like what is use in this uTube Video would be a better way and trying to get the bullet in the right position each time but by just having between the 2 Rollers and rolling over a File should make Easy for a newbie. I get some have done this for years and have the right skills but for someone like myself and not sure how well it will turn was why I was asking.
Then I came across the amaozn lnk (above) but hard to know if those like some on amazon will even work?
Also Not a Facebook User so can't see what is on Facebook.
Here is another ;

Precise Pivot Head Knurling Tool, 4-1/2" x 1/2" x 1/2" - 2220-0005

Shop Precise Pivot Head Knurling Tool, 4-1/2" x 1/2" x 1/2" - 2220-0005 crafted by Penn Tool Co. to deliver unmatched reliability. Transform your production with quality you can rely on order from us now!

www.penntoolco.com

But these are more for usage with a Lathe and stuff like that like a machinist would use?
Guess there is a lot more to knurling ML Bullets.
Was hoping to find a way that is easy & consistent - guess that is never what happens with muzzleloading stuff?
Guess I will just allow my bullets be loose and hope for some good shooting results. Takes a lot just to do Muzzleloading the best right way... (for me anyway)
KE

 

[feanor]

Even getting consistent results with a lathe and knurl can be tricky at times until you get your feeds and speeds right.

 

[ElDiablito]

Here is the Video of the Roller I was looking for it is not simple sniping a simple picture from it.

From what the member referred a link is what I was hoping to get a more "consistent" results. Using 2 files is mention on a few forums but thought a Roller like what is use in this uTube Video would be a better way and trying to get the bullet in the right position each time but by just having between the 2 Rollers and rolling over a File should make Easy for a newbie. I get some have done this for years and have the right skills but for someone like myself and not sure how well it will turn was why I was asking.
Then I came across the amaozn lnk (above) but hard to know if those like some on amazon will even work?
Also Not a Facebook User so can't see what is on Facebook.
Here is another ;

Precise Pivot Head Knurling Tool, 4-1/2" x 1/2" x 1/2" - 2220-0005

Shop Precise Pivot Head Knurling Tool, 4-1/2" x 1/2" x 1/2" - 2220-0005 crafted by Penn Tool Co. to deliver unmatched reliability. Transform your production with quality you can rely on order from us now!

www.penntoolco.com

But these are more for usage with a Lathe and stuff like that like a machinist would use?
Guess there is a lot more to knurling ML Bullets.
Was hoping to find a way that is easy & consistent - guess that is never what happens with muzzleloading stuff?
Guess I will just allow my bullets be loose and hope for some good shooting results. Takes a lot just to do Muzzleloading the best right way... (for me anyway)
KE

There’s nothing consistent about the way that guy is knurling! Lol

You’re overthinking it.