Let's See Your Semi-Custom Tikka Builds

[jamesmc8]

T3x superlite 6.5cm
Just got it back from the smith after having 4 inches chopped of the barrel and threaded.
Stockys vg stock olive web
Unknown rings
Trijicon tenmile 3-18 mil
Huxwerx ventum 7.62
Everything torqued with paint pen
View attachment 772029

Are these the medium or the low UM rings?

 

[Mountainrancher]

Are these the medium or the low UM rings?

Lows

 

[DisplacedHusky]

Thank you for all the inspiration in this thread. I finally finished my build (assembly).

Tikka T3X 300 WM donor
CarbonSix 21” 6.5 PRC barrel
Stocky’s VG Hunter
UM Tikka Rings and level
Trijicon Credo 2.5-15
UM Tikka rings
UM bubble level
Silencerco Harvester Evo

 

[BCsteve]

Thank you for all the inspiration in this thread. I finally finished my build (assembly).

Tikka T3X 300 WM donor
CarbonSix 21” 6.5 PRC barrel
Stocky’s VG Hunter
UM Tikka Rings and level
Trijicon Credo 2.5-15
UM Tikka rings
UM bubble level
Silencerco Harvester Evo

View attachment 792970

Nice set up. Do you know what it weighs?

 

[DisplacedHusky]

Nice set up. Do you know what it weighs?

8 lbs 10 oz with optic and suppressor.

 

[KY_coop]

Took my 284 win build to Colorado for 3rd rifle season. Put it through some tough days. Learning to deal with snow and ice is a new ball game for a guy from ky.

 

[jamesmc8]

For those using the High Desert Bottom Metal with a Stocky's VG2 did you have to do any inletting to get it to fit?

 

[bojangles808]

It's great. I've had it for about 2 years now and the process for getting it was a real pain. Just dropped in the barreled action and torqued it up and has been shooting great. I've taken it on a spring bear hunt in Idaho and several whitetail hunts and it's been great. AG is taking orders for inletting now, which should make the process of getting one smoother...

I am intrigued by the Rokstock and may try one of those out for my other Tikka when orders open back up.

How long is the trigger reach on the alpine hunter?

 

[bober90]

How long is the trigger reach on the alpine hunter?

Length of pull is 13.5


Sent from my iPhone using Tapatalk

 

[bojangles808]

Length of pull is 13.5


Sent from my iPhone using Tapatalk

no the distance from the front of the grip to the trigger. have you measured it, it looks long

 

[bober90]

no the distance from the front of the grip to the trigger. have you measured it, it looks long

About 1/8” shorter than the factory stock. Guess it looks short because it’s a 20” barrel.

Edit: Just under 16.5” from tip of the forend to the trigger.

Sent from my iPhone using Tapatalk

 

[PC356]

16” 6.5 CM I put together recently. Sent off a factory stock had layin around to have it custom Cerakoted, pillared and over sized lugged it. Dead Catted the barrel channel for a much better free float as well. Picked up a cheap stainless factory sporter barrel on eBay of unknown history that had been shortened and threaded with a shitty lookin crown job. Had my buddy with Mad Man Muzzle Works in W. TX knock another 2” off it and beautifully threaded/recrowned it. Tryin some D3 Precision scope rings off EBay as well. Lightweight and use chromoly recoil lugs front and rear. Priced very nicely too, see how they hold up. Mtn Tactical bottom metal, SHV 3-10, and a SiCo Harvester. Weighed in about 7.5 lbs with a full mag, no can or bipod. Sucker shoots 127 gr LRXs about 2600 fps better than I could’ve hoped for. Very simple and seemingly effective for not a ton of money other than maybe the NF.

 

[Tanner]

16” 6.5 CM I put together recently. Sent off a factory stock had layin around to have it custom Cerakoted, pillared and over sized lugged it. Dead Catted the barrel channel for a much better free float as well. Picked up a cheap stainless barrel on eBay of unknown history that had been shortened and threaded with a shitty lookin crown job. Had my buddy with Mad Man Muzzle Works in W. TX knock another 2” off it and beautifully threaded/recrowned it. Tryin some D3 Precision scope rings off EBay as well. Lightweight and use chromoly recoil lugs front and rear. Priced very nicely too, see how they hold up. Mtn Tactical bottom metal, SHV 3-10, and a SiCo Harvester. Weighed in about 7.5 lbs with a full mag, no can or bipod. Sucker shoots 127 gr LRXs about 2600 fps better than I could’ve hoped for. Very simple and seemingly effective for not a ton of money other than maybe the NF.
View attachment 795736View attachment 795738

Handy!