Let's See Your Semi-Custom Tikka Builds

[adowney15]

Just got my Tikka 7mm rem mag finished up. Specs are as follows:

Mesa Precision Arms Stock (Westen Slope color)
Proof Research barrel
MTN Tactical magazine and bottom metal and bolt knob.
TI pro 3 muzzle break blended
Hawkins UL rings with offset bubble
Trijicon tenmile 3-18 mil
Atlas Tall CAL, with two screw clamp.

All put together at mesa precision arms and cerakoted by them as well.

Weighs 9lbs 11oz empty and 9lbs 14 ounces with shells.

 

[Leo45]

Just got my Tikka 7mm rem mag finished up. Specs are as follows:

Mesa Precision Arms Stock (Westen Slope color)
Proof Research barrel
MTN Tactical magazine and bottom metal and bolt knob.
TI pro 3 muzzle break blended
Hawkins UL rings with offset bubble
Trijicon tenmile 3-18 mil
Atlas Tall CAL, with two screw clamp.

All put together at mesa precision arms and cerakoted by them as well.

Weighs 9lbs 11oz empty and 9lbs 14 ounces with shells.

Looks great, are the weights including the bipod or not?

 

[Idaho4x4Bronco]

Just got my Tikka 7mm rem mag finished up. Specs are as follows:

Mesa Precision Arms Stock (Westen Slope color)
Proof Research barrel
MTN Tactical magazine and bottom metal and bolt knob.
TI pro 3 muzzle break blended
Hawkins UL rings with offset bubble
Trijicon tenmile 3-18 mil
Atlas Tall CAL, with two screw clamp.

All put together at mesa precision arms and cerakoted by them as well.

Weighs 9lbs 11oz empty and 9lbs 14 ounces with shells.

Barrel length? with and w/o brake? Looks vn. How much does the scope weigh?

 

[adowney15]

Looks great, are the weights including the bipod or not?

Weighs 8lbs 13oz empty without the bipod, or right at a out 9 loaded.

 

[adowney15]

Barrel length? with and w/o brake? Looks vn. How much does the scope weigh?

Barrel length without break is 24 inches. With brake is a touch over 26. Scope weighs 24 ounces on the dot.

 

[archp625]

Just got my Tikka 7mm rem mag finished up. Specs are as follows:

Mesa Precision Arms Stock (Westen Slope color)
Proof Research barrel
MTN Tactical magazine and bottom metal and bolt knob.
TI pro 3 muzzle break blended
Hawkins UL rings with offset bubble
Trijicon tenmile 3-18 mil
Atlas Tall CAL, with two screw clamp.

All put together at mesa precision arms and cerakoted by them as well.

Weighs 9lbs 11oz empty and 9lbs 14 ounces with shells.

Great looking rifle. Hopefully she's a shooter.

 

[Nateskate11]

Build looks great! I really like the Mesa stocks. Was that a pre fit barrel?

 

[Redside]

Just received the barrel yesterday and put it together last night. This is my first semi-custom or custom anything, have always done factory. Pretty excited to get load development going. Hope it shoots as good as I think it looks!

Tikka T3X long action
20" 7SAUM 1-8"TW Carbon Six
Chambered for 155gr Hammers 3.024" COAL (will be .040" off the lands at that measurement)
Cerakote/Fluting by LRI Receiver is Tungsten, Bolt is Graphite Black. Fluting is Wrought Iron
Mesa Precisions Stock
SWFA 3-15 Mil
Waiting on a TBAC Ultra 7 gen II, currently 96 days in on my eform 4.
8.5lbs as pictured

I may or may not do anything to the trigger and bottom metal.

 

[adowney15]

Build looks great! I really like the Mesa stocks. Was that a pre fit barrel?

Yes it was a pre-fit

 

[philcox]

Tikka T3X 300WM, stock bolt, trigger, bottom metal, and mag
22" CarbonSix Featherlite 1:9 twist (planning on 175g LRX)
Mesa Precision Arms Altitude Stock
Leupold VX5-HD 3-15x44 Windplex with ZL (tally single piece X-Low mounts)
WIll have a Ross Muzzle Break (self-time) when in Cali, and use my dad's Banish 30 can when out of state
Sits at 8.3lbs as pictured (unloaded)

Sitting at just around $3300 with the Muzzle Break (not the Can). I think you can get something similar from some custom makers out there, and save some time. Might be a bit more $, but likely not much. I did ike the experience of making this happen though. Now I'll drop another $200 easy on load development

 

[Leo45]

Tikka T3X 300WM, stock bolt, trigger, bottom metal, and mag
22" CarbonSix Featherlite 1:9 twist (planning on 175g LRX)
Mesa Precision Arms Altitude Stock
Leupold VX5-HD 3-15x44 Windplex with ZL
WIll have a Ross Muzzle Break (self-time) when in Cali, and use my dad's Banish 30 can when out of state
Sits at 8.3lbs as pictured (unloaded)

View attachment 412084

Are those Talley rings? If so, how do you like the bubble level on the top?

 

[philcox]

Are those Talley rings? If so, how do you like the bubble level on the top?

Yes they are X-Low. I like it. The way I shoot, I can see it pretty well, and I like it better than the side mounts. I think it might be a bit mroe durable too.

 

[schmalzy]

T3 Stainless 270 win
Stockys Carbon Fiber with diy paint job
Talley lows
Trijicon Credo 3-9x40
Mountain Tactical bottom metal
Mountain tactical spring

Future - microbastard brake and getting bolt fluted and bolt knob skeletonized.

I’ll try to get some pictures of tang area as requested and the bedding area when I pull it off.


Sent from my iPhone using Tapatalk

 

[Leo45]

T3 Stainless 270 win
Stockys Carbon Fiber with diy paint job
Talley lows
Trijicon Credo 3-9x40
Mountain Tactical bottom metal
Mountain tactical spring

Future - microbastard brake and getting bolt fluted and bolt knob skeletonized.

I’ll try to get some pictures of tang area as requested and the bedding area when I pull it off.


Sent from my iPhone using Tapatalk

What’s the scale read? Sorry I can’t tell

 

[schmalzy]

What’s the scale read? Sorry I can’t tell

7.055 pounds


Sent from my iPhone using Tapatalk

 

[HighUintas]

T3 Stainless 270 win
Stockys Carbon Fiber with diy paint job
Talley lows
Trijicon Credo 3-9x40
Mountain Tactical bottom metal
Mountain tactical spring

Future - microbastard brake and getting bolt fluted and bolt knob skeletonized.

I’ll try to get some pictures of tang area as requested and the bedding area when I pull it off.


Sent from my iPhone using Tapatalk

That's a dang nice looking trigger guard and mag

And funny, because the stock along with color is exactly what I was wanting to do with my Tikka. I'll be doing that again with the TG and mag, but will get a high desert rifle works one because I like the round shape more

 

[Leo45]

7.055 pounds


Sent from my iPhone using Tapatalk

Wow, that is nice and light

 

[2rsquared]

I like the solid green color that you chose. Nice looking rifle.


Sent from my iPhone using Tapatalk

 

[schmalzy]

I like the solid green color that you chose. Nice looking rifle.


Sent from my iPhone using Tapatalk

Appreciate it. Hard to see in those pictures but there is a brown and black speckled texture on top of the green as well, and then 4-5 coats of clear matte enamel. (Had to clean up inside where bottom Metal goes just a bit).

Sent from my iPhone using Tapatalk

 

[HighUintas]

Appreciate it. Hard to see in those pictures but there is a brown and black speckled texture on top of the green as well, and then 4-5 coats of clear matte enamel. (Had to clean up inside where bottom Metal goes just a bit).

Sent from my iPhone using Tapatalk

Any idea if it's possible to widen the barrel channel a tad without damaging the stock? I was considering calling them to ask