Let's See Your Semi-Custom Tikka Builds

[Lytro]

What's the weight on that?

Just over 9# with a full mag.

 

[TK1981]

Tikka t3x 300wsm
22” proof sendero 1-9
McMillan game warden
Mt tactical bottom metal and mags
Hawkins hybrid rings
Vx6 4-24

 

[Juan_ID]

Tikka T3x Stainless in .223
Barrel cut to 16” and threaded to 1/2”
Adapter for 1/2” to 3/4” for suppressor
Stocky’s VG stock
SWFA 3-9x42
UM rings
UM level

What’s that little beauty weigh? I’m thinking mine will be setup very similar only with the factory stock.

 

[atmat]

What’s that little beauty weigh? I’m thinking mine will be setup very similar only with the factory stock.

7 lbs, 9oz as pictured. The thread protector will come off and TBAC Ultra7 will go on eventually, so should come right to about 8lbs, 5oz loaded.

 

[OXN939]

Finally got the chance to put everything together on my T3X '06. B&C Medalist, Nightforce SHV 3-10x42, MT Raptor scope mount, MT bottom metal. Fit and finish looks great on everything.



One question for the Tikka guys. Went to chamber a few rounds just to check function, and they were super tight in the chamber. Several rounds of factory Remington ammo had marks like these on the case head after chambering. Rifle has zero rounds through it. Sent a bore brush into the chamber to see if it was factory grease or something- didn't come out with much. This normal?

 

[BlackCore]

I'll come back to this. I have a few pieces coming in later this week. Building my first bolt and I'm stoked.

 

[RoofKorean]

Tikka T3X Veil Wideland 24" 6.5 Creedmoor
Pure Precision (Mesa) Altitude Stock
Pure Precision Bottom metal
Vortex Razor HD LHT 4.5-22x50
Hawkins Hybrid High Rings
SRS Arca/Pic rail
Deadair Keymirco Brake
Anarchy outdoors bolt handle
MT bolt shroud

Total weight at 8.8#
Hope she like Factory ELDx!

 

[TetonRecon]

Got my Carbon 6 300 WSM prefit installed today. View attachment 547573

What is the profile and length of your carbon 6 on this setup?

 

[HandgunHTR]

Well, my build is mostly done. I say mostly because I currently have it in a B&C stock while I wait for the Manners EH1TK stock that I ordered 4 months ago. Still a bit of a wait, I suppose.


Here are the specs:
Tikka T3 donor action. Was a 270WSM.
Original bolt fluted and coated by boltfluter
Mountain Tactical outdoorsman bolt handle
Oregon Mountain bolt shroud
Oregon Mountain long action bolt stop
Mountain Tactical bottom metal
Mountain Tactical LA mag
Bell and Carlson M24 stock (will be replaced by said Manners EH1TK some day)
M-Carbo trigger spring in the original trigger
Preferred Barrel Blank 1-9" twist, Light Palma contour, finished at 21.5", spiral fluted, and muzzle threaded 5/8-24
Salmon River Solutions SS-Pro 4 brake (will be removed when my suppressor for this rifle gets out of jail)
Mountain Tactical Raptor mount (0 MOA, medium)
Tract Toric UHD 2.5-15X44 FFP mrad/mrad scope (non-illuminated)

 

[Deerfield]

What is the profile and length of your carbon 6 on this setup?

It’s a 20 inch sendero

 

[Cant hit em]

Finished a gun i got at the pawn shop , kept it simple and cheap.
Its 243 1:10
Cerakoted action and barrel
LRI fluted the bolt and Cerakoted
Arken epl4 4-16
Sportsmatch rings

 

[Gorp2007]

223 cut to 20" with a TBAC Ultra 7. Pulled it out of the KRG Bravo and back into a factory T3X stock with a vertical grip to match my 30-06 for position practice prior to elk season.

SWFA 10x in a pair of Sportsmatch rings.

Also upgraded to the Waters 6-rd mags so I can use longer bullets and the Varget I already had on hand.

 

[thinhorn_AK]

T3x 30-06, cut barrel to 18”, high desert bottom metal, limbsaver pad, vertical grip. Nightforce shv 3-10 w/ sportsmatch to84. Thunderbeast ultra 7.

 

[ACHILLES]

.223Rem 16” 8lbs total

 

[Macintosh]

.223Rem 16” 8lbs total

What rail is that?

 

[ACHILLES]

Mountain Tactical. The scope is mounted pretty far back now because I had the barreled action in a stock with a 2” longer lop.

 

[weisenbu]

.223Rem 16” 8lbs total
View attachment 600654
View attachment 600655
View attachment 600656

Beautiful build. What stock is that?

 

[diverc18]

Well, my build is mostly done. I say mostly because I currently have it in a B&C stock while I wait for the Manners EH1TK stock that I ordered 4 months ago. Still a bit of a wait, I suppose.


Here are the specs:
Tikka T3 donor action. Was a 270WSM.
Original bolt fluted and coated by boltfluter
Mountain Tactical outdoorsman bolt handle
Oregon Mountain bolt shroud
Oregon Mountain long action bolt stop
Mountain Tactical bottom metal
Mountain Tactical LA mag
Bell and Carlson M24 stock (will be replaced by said Manners EH1TK some day)
M-Carbo trigger spring in the original trigger
Preferred Barrel Blank 1-9" twist, Light Palma contour, finished at 21.5", spiral fluted, and muzzle threaded 5/8-24
Salmon River Solutions SS-Pro 4 brake (will be removed when my suppressor for this rifle gets out of jail)
Mountain Tactical Raptor mount (0 MOA, medium)
Tract Toric UHD 2.5-15X44 FFP mrad/mrad scope (non-illuminated)

View attachment 598507View attachment 598508

Was looking at getting almost the same barrel from preferred barrel blanks but going back and forth between different contours. How do you like the light Palma?

 

[KU_Geo]

Well, my build is mostly done. I say mostly because I currently have it in a B&C stock while I wait for the Manners EH1TK stock that I ordered 4 months ago. Still a bit of a wait, I suppose.


Here are the specs:
Tikka T3 donor action. Was a 270WSM.
Original bolt fluted and coated by boltfluter
Mountain Tactical outdoorsman bolt handle
Oregon Mountain bolt shroud
Oregon Mountain long action bolt stop
Mountain Tactical bottom metal
Mountain Tactical LA mag
Bell and Carlson M24 stock (will be replaced by said Manners EH1TK some day)
M-Carbo trigger spring in the original trigger
Preferred Barrel Blank 1-9" twist, Light Palma contour, finished at 21.5", spiral fluted, and muzzle threaded 5/8-24
Salmon River Solutions SS-Pro 4 brake (will be removed when my suppressor for this rifle gets out of jail)
Mountain Tactical Raptor mount (0 MOA, medium)
Tract Toric UHD 2.5-15X44 FFP mrad/mrad scope (non-illuminated)

View attachment 598507View attachment 598508

What’s that set up weigh? I

 

[HandgunHTR]

Was looking at getting almost the same barrel from preferred barrel blanks but going back and forth between different contours. How do you like the light Palma?

It is a bit heavier than I was hoping for but it was the lightest profile I could get in the .338 caliber for the Tikka prefits. If I could have, I would have gone with the .750 taperless profile.

Overall, I am happy with it. The brake mounted up nicely, and I threaded one of my .30 cal cans on just to see and it also threaded on and snugged up just right.