KRG Echo - Sporterish version of bravo for tikkas

Hurley88

FNG
Joined
Dec 11, 2022
Messages
83
Thank you very much, this is great to see. Is that CTR the 24” version? If so how is the balance in the echo?
It’s the 24” version chopped to 23” to get rid of the threaded portion. Balance is forward but not overly so. I’d say perfect for a rifle that will be used solely from a rest.

The mag retention spring is captured/held by the screw that holds the trigger to the bottom of the action.

Here you can see it with the mag removed:
IMG_5459.jpeg

Here you can see it attached to the trigger. It’s that little piece of spring steel being held by the trigger screw.
IMG_5460.jpeg
 

ztc92

WKR
Joined
May 8, 2022
Messages
348
It’s the 24” version chopped to 23” to get rid of the threaded portion. Balance is forward but not overly so. I’d say perfect for a rifle that will be used solely from a rest.

The mag retention spring is captured/held by the screw that holds the trigger to the bottom of the action.

Here you can see it with the mag removed:
View attachment 789031

Here you can see it attached to the trigger. It’s that little piece of spring steel being held by the trigger screw.
View attachment 789032
Thank you sir, very helpful! I’m betting my 20” CTR would balance very well then.
 

Dobermann

WKR
Joined
Sep 17, 2016
Messages
1,908
Location
EnZed
Thanks for including the scale photos. Looks like you have a similar setup to me (Tikka CTR in a bravo).

From the photos, looks like the bravo in a CTR and comes in at 3 pounds 8 oz with a CTR mag, whereas going to the Echo with 5 round mag you’re at 2 pounds 14 oz.

After the reports of issues with CTR mags at the S2H class, I’m thinking of swapping my Bravo to an Echo with the CTR barreled action (it’s a 20” 6.5 creedmore) to use factory tikka mags.

Any thoughts on switching from the CTR bravo to the echo since you seem to have done the same thing?
Another option is to just use AICS pattern mags. The metal MDTs work well, as do the poly body / metal lips mags. All-poly have had some issues.

I've read (but haven't confirmed) that the Sako TRG mags fit the CTR bottom metal, but are better quality and have fewer issues. No idea if this is true or just internettery.
 
Last edited:
  • Like
Reactions: NSI
Top