KRG Echo - Sporterish version of bravo for tikkas

[Hurley88]

Thank you very much, this is great to see. Is that CTR the 24” version? If so how is the balance in the echo?

It’s the 24” version chopped to 23” to get rid of the threaded portion. Balance is forward but not overly so. I’d say perfect for a rifle that will be used solely from a rest.

The mag retention spring is captured/held by the screw that holds the trigger to the bottom of the action.

Here you can see it with the mag removed:


Here you can see it attached to the trigger. It’s that little piece of spring steel being held by the trigger screw.

 

[ztc92]

It’s the 24” version chopped to 23” to get rid of the threaded portion. Balance is forward but not overly so. I’d say perfect for a rifle that will be used solely from a rest.

The mag retention spring is captured/held by the screw that holds the trigger to the bottom of the action.

Here you can see it with the mag removed:
View attachment 789031

Here you can see it attached to the trigger. It’s that little piece of spring steel being held by the trigger screw.
View attachment 789032

Thank you sir, very helpful! I’m betting my 20” CTR would balance very well then.

 

[Dobermann]

Thanks for including the scale photos. Looks like you have a similar setup to me (Tikka CTR in a bravo).

From the photos, looks like the bravo in a CTR and comes in at 3 pounds 8 oz with a CTR mag, whereas going to the Echo with 5 round mag you’re at 2 pounds 14 oz.

After the reports of issues with CTR mags at the S2H class, I’m thinking of swapping my Bravo to an Echo with the CTR barreled action (it’s a 20” 6.5 creedmore) to use factory tikka mags.

Any thoughts on switching from the CTR bravo to the echo since you seem to have done the same thing?

Another option is to just use AICS pattern mags. The metal MDTs work well, as do the poly body / metal lips mags. All-poly have had some issues.

I've read (but haven't confirmed) that the Sako TRG mags fit the CTR bottom metal, but are better quality and have fewer issues. No idea if this is true or just internettery.

 

[mlevimadden]

Any of you guys with Echo stocks in-hand have updated feedback after some more use? I'm debating pulling the trigger on one to be able to use for some NRL hunter matches this spring.

 

[Bluumoon]

Any of you guys with Echo stocks in-hand have updated feedback after some more use? I'm debating pulling the trigger on one to be able to use for some NRL hunter matches this spring.

Pretty much the same as Bravo for me so far, which is to say I'm happy with it. I took out the barrel channel insert and plenty of room around barrel. I do not have any plates/rails on it, so no feedback on shooting off tripod/bipod

 

[skipper907]

Any of you guys with Echo stocks in-hand have updated feedback after some more use? I'm debating pulling the trigger on one to be able to use for some NRL hunter matches this spring.

You may consider the bravo for shooting NRL because you can use 10 round aics mags. the echo would be fine but your limited on the mag I think

 

[mlevimadden]

You may consider the bravo for shooting NRL because you can use 10 round aics mags. the echo would be fine but your limited on the mag I think

Understood. They will be my first matches, so I'm just planning on skills division. I figured I'd be a little handicapped by running 4-rd factory mags, but I'd rather have that setup than being forced to run AICS mags during hunting season and don't have the budget for two stocks currently.

 

[Bluumoon]

You may consider the bravo for shooting NRL because you can use 10 round aics mags. the echo would be fine but your limited on the mag I think

Mamba mags -for SA cartridges, 10 rounds $50 each

 

[mlevimadden]

Mamba mags -for SA cartridges, 10 rounds $50 each

This is why I love rokslide. I had never heard of these. Thanks!

 

[FLS]

Any of you guys with Echo stocks in-hand have updated feedback after some more use? I'm debating pulling the trigger on one to be able to use for some NRL hunter matches this spring.

I put the short ARCA rail on mine in front of the mag well. I shot it off my tripod Wednesday afternoon. It balances well, and is easy to shoot. I went 5 for 5 on a mini IPSC at 500 seated with my 308 and Hornady Black 168 ammo. If you’re going to compete, you would be better off with a Bravo and 10 round AI pattern mags.

 

[pjohnson8168]

Anybody know of a full length arca rail that fits the holes currently on the formed of the stock?

 

[skipper907]

I have seen pictures of the salmon river hunter rail attached to one

Sent from my SM-A156U using Tapatalk

 

[ckkone]

Iv been running the echo for a week.
They shipped the order fast. I recommend you add the LOP spacers for $15

After lookin at and trying several tikka stock options some of which cost more then a new gun, I was happy to see this option.

Don't like :
Front action screw captured. Not an issue for seating the action just a pain

LOP spacers should be included

The dam cheek rest has to be raised out of the way to pull the bolt (please slap whoever at KRG screwed that up)
I will be modifying this

I'm 50/50 on the hook under the rear of the stock. So far shooting it's not been an issue and actually offers a couple different planes (heights) to put a bag under.

Likes

The action fit in the chassis is tight and accurate

The factory mag fits tight and feeds great from the 22-250, 6.5cm and .308 that I tried.

Stock feels good to get behind. Prone, sitting or standing on a tripod.

Handles recoil well

Weight and balance feel good

I added a salmon river solutions rail so that I can run arca from my tripod and has a short pic attachment up front. I think this is a nice addition and makes this stock very versatile for me.
Overall for the money I think it's hard to beat.

View attachment 787635View attachment 787636

Did you drill any additional holes to mount that salmon river rail or just use the 3 center mount holes toward the front of the stock? Also did you use the Short rail overall length- 10.625″ or the Long rail overall length- 11.5″?

 

[ckkone]

Got mine today, Tikka T3 Super Lite 7mm REM Mag,
Vortex Razor HD LH 3-15x42, Silencerco Harvester 300, came in at 9.0 lbs.



Has the narrower front channel and looks perfect with the skinny barrel.

 

[texag10]

After getting a CZ 457 MTR, I wanted a stock with similarly short trigger reach and a vertical grip for my Tikka. I had some gift cards to Midway USA, and my KRG Echo arrived today. LOP adjustment kit and adjustable height buttpad are on the way.

This is a carbon six sendero contour barrel with the barrel channel inserts removed. If you pinch the barrel and fore-end together, they will touch. There is no contact when resting the stock on something as you would when shooting.

I'd prefer more room, but the goal is to shoot out the barrel this year and replace it with a steel barrel in a smaller contour.

 

[flyfisher117]

Anybody have a LOP measurement for tur Echo with no spacers?

 

[STAxel]

Anybody have a LOP measurement for tur Echo with no spacers?

The website says ~12.8”…it felt noticeably short for me. I had to put 2 spacers in for it to feel normal for me (or similar enough to the factory tikka stock with a limbsaver)

 

[flyfisher117]

The website says ~12.8”…it felt noticeably short for me. I had to put 2 spacers in for it to feel normal for me (or similar enough to the factory tikka stock with a limbsaver)

Thanks, seen a lor of complaints on the LOP so I was curious if it isn't true to spec or just truly too short.

 

[STAxel]

Thanks, seen a lor of complaints on the LOP so I was curious if it isn't true to spec or just truly too short.

Personally, I didn’t mind that the LOP starts on the shorter side, I’m sure a lot of folks appreciate that more than I do. It’s just a pain in the ass that spacers weren’t included in the box and we all have to order it separately.

 

[texag10]

My LOP spacer kit and height adjust buttpad kit came in. 1 spacer plus the height adjust results in a 14.25" LOP.

Now it's the sako TRG 42 we have at home.