Interesting Ruger Hawkeye Hunter in 358 Winchester

That's a great setup! That will knock the snot out of the biggest buck in the woods! Also.. make a rug out of a black bear!
Here is my 358 Winchester.. it's a Ruger American Predator!

I loaded up 200 grain Hornady Interlock and got a .262 inch group at 100 yards!
 

Attachments

  • PXL_20260116_175536347.MP.jpg
    PXL_20260116_175536347.MP.jpg
    227.6 KB · Views: 12

16.6" threaded barrel
Stainless barrel, action, and floorplate
Walnut stock
Mauser-type controlled round feed
6.7 Lbs
4 round mag and 3 position safety.

I can't say I would change much about this rifle. Very tempted, especially because I have a Rex Silentium 358 can already...

Trying to decide between the 308 Winchester (I would buy factory ammo) or 358 Winchester (I would reload everything)....
Looking at the numbers, 358 Winchester seems to be a hammer up close and match 308 at distance.

Hornady lists loads for a 358 Win with the 200gr bullet going 2700 FPS (same speed as the 308 pushes a 165gr).

1.jpg
I would love one like that with 18"-20" barrel and the ruger iron sights. Like the M77RS here.
1770677525987.png

Mike
 
At first glance.. I thought it was a 350 Remington Mag!

Having open sights on a rifle is nice! Don't see that offered as much nowadays.. sadly!
However.. you can get them installed! I've had sights installed by my gunsmith. He charges $15 per hole tapped! Most open sights only require two holes!
That's for the front sight.. cause Skinner makes they're .860 that fits on the receiver! Along with Williams peep sight.. they're .860 as well :)
 
Received mine the other day.
Going to be this years Adk whitetail tracking gun.
Set up with a vx3hd 1.5-5 cerakoted
Loaded with some interlock 200gr.
Hoping varget shoots as 4064 is hard to find
 

Attachments

  • IMG_1623.jpeg
    IMG_1623.jpeg
    417.4 KB · Views: 22
Nice! Looks ready to knock the snot outta critters!

I also use the Hornady 200 grain Interlock bullets! I would like to get my hands on some 225 grain partions.. but I've been hearing that they're discontinued!
 
I would love to find one of these in 358 winchester, I have and reload for a pair of 35 Whelens already so the components are mostly on hand already. 308 brass is everywhere and if you hunt east of the Mississippi, this rifle will level anything you aim it at.
 
I maxed out at 2540 in my 20" Backed it down to 2450 for best accuracy, but that's fine with me. I'm still north of 2000 at 300yds with a 220gr Speer.
My longest shot so far has been 198yds & hammered the crap out a nice whitetail.
It's far from being a laser beam, but as a not-long-range gun, it's pretty phenomenal.
I've only killed hogs & deer with it, but they've all died noticeably quicker than with my old .308View attachment 974345
Awesome looking piece! What are the specs on your rifle? Looks like something I would want to have made up. Thanks!
 
I did not shoot it through a chronograph. Load is 2 grains under max so I would assume it’s not crazy fast
You only lose 25 to 35 fps per inch lost

Which isn't too bad! Most people who hunt with the 358 Winchester are taking game inside 200 yards!

I personally load mine at 2300 fps .. but I'm getting sub inch groups every time I shoot it!

Those 35 caliber bullets will knock the snot out of the biggest buck in the woods and make a rug out of a black bear without blinking!
 
There's not really much to write up!
I scored a Rem 700 .243 Youth model at an end of season Walmart sale in 2015 (i think!) for $349 I shipped it straight up to Jesse at JES reboring & had it taken out to .358.
I picked up a smoking deal on a used Brown's Precision Pound'r stock & installed a BDL floorplate & mag box. I initially had a Vortex scope on it, but it didn't last long. I replaced it with a Leupold Vx2 2-7x33 in Talley lightweight rings that've (so far/fingies crossed/touch wood) held a perfect zero. Load development was silly simple. I tried 2 bullets & 1 powder combo & hit gold on my second try.
She weight exactly 7lb with 4 in the box, 1 in the pilot's chair.

Awesome looking piece! What are the specs on your rifle? Looks like something I would want to have made up. Thanks!

Pretty much as above! The only mildly fancy bit is the Kevlar stock which I would never have used if it hadn't been such a blinding deal ($150, iirc) & the red buttpad that I fitted & mounted myself.
 
Back
Top