Whisky
WKR
- Joined
- Dec 25, 2012
- Messages
- 1,424
I should mention the rest I currently have on is a biscuit. i will also mention currently when an arrow is nocked and line up the pins with the string, my arrow is pointed in towards the riser quite a bit. I want to roll with the biscuit for hunting season so I hope I can get it to work. When I first got the bow in January it was set up for a biscuit but was giving me weak spine indications. I couldn't get it to go away. Ended up buying a drop away and within 2 arrows I had clean bullet holes in paper. So that is why I have not shot through paper yet, with the biscuit. I seem to chase the perfect tear and never get it. This is why I tried some modified french tuning crap.
Normally Darren I like to tune like you, get bullet holes through paper at multiple distances and check BHs, maybe make some FINE rest adjustments then and call her good.
Bow:
S34, #2 cams
72 lbs
28.5 DL
6 5/8 BH
33.75 ATA
Arrow:
Easton ST Epics black, 300
carbon to carbon 28.75"
vanes 3 Blazers - 18
H nock - 9
HP insert - 23
With factory ATA and BH Ontarget says my spine is good. I have yet to run it with the current measured ATA and BH.

Bow:
S34, #2 cams
72 lbs
28.5 DL
6 5/8 BH
33.75 ATA
Arrow:
Easton ST Epics black, 300
carbon to carbon 28.75"
vanes 3 Blazers - 18
H nock - 9
HP insert - 23
With factory ATA and BH Ontarget says my spine is good. I have yet to run it with the current measured ATA and BH.