I finally did it.

stan5677

Lil-Rokslider
Joined
Dec 27, 2020
Messages
256
Just purchased a 7mm-08 in a Bergara B14 Ridge. I know I know I know Tikka T3x or bust but there were no 7mm-08 Tikkas available and I had my heart set on a 7mm-08. Going to pair this with hawkins featherweight rings and Trijicon Credo HX 2.5-15x42 scope.
 
I am a big fan of the 7-08. Been shooting it since the early 2000s.

I agree with Castle that if you are a 300 and in hunter, the 120 grain NBT is a fantastic bullet. The 162s are good, but you can run out of room in the case really quickly if you have mag or chamber restrictions that are going to limit you to around 2.800" OAL. If that is the case, the 150 grain ELD-X bullets are a very good compromise. They will perform out to the outer limits of the 7-08s ability.

Congrats on the new rifle. I look forward to seeing how it performs.
 
There's a 7mm-08 stainless T3x on guns.com right now. Or there was last night, anyway. It's not too late!!
That was the one I was looking at it was gone. I made the purchase at 1 am and when I finally decided to go for it it was sold out.
 
I am a big fan of the 7-08. Been shooting it since the early 2000s.

I agree with Castle that if you are a 300 and in hunter, the 120 grain NBT is a fantastic bullet. The 162s are good, but you can run out of room in the case really quickly if you have mag or chamber restrictions that are going to limit you to around 2.800" OAL. If that is the case, the 150 grain ELD-X bullets are a very good compromise. They will perform out to the outer limits of the 7-08s ability.

Congrats on the new rifle. I look forward to seeing how it performs.
This first season I'm keeping it 100 and not going to attempt anything beyond that distance until I can really put some lead down range. I'm excited I've been wanting another rifle for years and the stars aligned. I had the money to go custom but couldn't really justify it.
 
150 ELDX
46.2 gr Big Game
Magnum primer (not necessary but preferable with ball powders)
Play with seating depth for best accuracy
Expect 2780 fps ballpark for 22.4” barrel

140 Partition or AccuBond
47.5 gr Big Game
Magnum primer
Expect 2890 fps or so, slightly less for AB

120 NBT
51.5 gr BG
Magnum primer
Expect 3125 fps or so


Max or close to it for all loads so work up. I get best results loading close to the lands.

Deer, elk, antelope.
 
Nosler 140 grain BT or AB, standard primer (Fed 210 is what I used), 47.0 grains of H4350, 2745 fps out of a 20" barrel. This one has room to go up, but that charge gave me the best SD and groups.

Nosler 120 grain BT, standard primer, 43 grains of Varget, 2725 fps out of a 17" barrel.

Hornady 139 grain SST, standard primer, 42.5 grains Varget, 2645 fps out of a 17" barrel.

I am also using a very similar load for the 150 grain ELD-X bullets as Pharmseller, so no need to post that one.
 
E
Nosler 140 grain BT or AB, standard primer (Fed 210 is what I used), 47.0 grains of H4350, 2745 fps out of a 20" barrel. This one has room to go up, but that charge gave me the best SD and groups.

Nosler 120 grain BT, standard primer, 43 grains of Varget, 2725 fps out of a 17" barrel.

Hornady 139 grain SST, standard primer, 42.5 grains Varget, 2645 fps out of a 17" barrel.

I am also using a very similar load for the 150 grain ELD-X bullets as Pharmseller, so no need to post that one.
What brass are you using? Is paying the extra for Alpha or Peterson worth it?
 
E

What brass are you using? Is paying the extra for Alpha or Peterson worth it?

I used regular Remington brass for many years. I use Starline now. I don't push my brass hard, so I don't see a need for Alpha or Peterson.

For my 7-08AI, I do push it. For that I use Lapua.

If you plan to push it to 65K or above, then go with Alpha brass as it can handle it. If you are going to stay within book max loads, then I recommend Starline as it is reasonably priced and hold up well to regular loads and good reloading practices.
 
I used regular Remington brass for many years. I use Starline now. I don't push my brass hard, so I don't see a need for Alpha or Peterson.

For my 7-08AI, I do push it. For that I use Lapua.

If you plan to push it to 65K or above, then go with Alpha brass as it can handle it. If you are going to stay within book max loads, then I recommend Starline as it is reasonably priced and hold up well to regular loads and good reloading practices.

I’m a newb at reloading so I won’t be pushing it. I do want to get above 2800 fps though.


Sent from my iPhone using Tapatalk
 
Back
Top