Home archery shop components?

[cscott144]

If you're getting the LCA Press just go ahead and get the limb lock kit. The original fingers will work for a little while but at the rubber material wears and smooths bows will start wanting to shoot out, especially beyond parallel limb bows.

 

[ResearchinStuff]

You can solve that issue by getting the total vise press instead

 

[cscott144]

I trust the Last Chance with the limb lock kit more.

 

[MountainTracker]

Alot has already been covered here. Heres some pics of my setup.

A couple of things I didnt see mentioned -

A stand for your arrows while vanes are drying. I 3d printed mine.

a soft arrow length mat for applying wraps evenly (if you use wraps)

good lighting - cant stress this one enough. That bar light mounts right to my press and was 30 bucks on Amazon.

paper tuner stand, and a target at shooting height for tuning ( not sitting on the ground) this is a home made pvc paper tuner and a harbor freight furniture dolly with some 2x4s to make a raised platform for the target.

I love the OMP vise for setting levels and micro tuning, but for general wrenching on the bow I use this cheap evercatch I got off Amazon. It holds the bow at the grip instead of the limbs, and i feel its more secure than the OMP if I need to torque on something. I think its a BAP knockoff.

Chronograph and tripod to hold it, if you feel like you need one.

View attachment 970876View attachment 970877View attachment 970880View attachment 970881View attachment 970882View attachment 970883
View attachment 970884

BT

Oh I like that green arrow holder


Sent from my iPhone using Tapatalk