Hamskea hybrid noise?

[HuntInWild88]

just had they hybrid hunter pro installed and I think it's pretty noisy..does any else have this issue?
Is there any fix?

 

[OR Archer]

What kind of noise?

 

[HoytHntr4]

Make sure the small fine adjustment knobs are snugged up after you tighten the allen. I had mine make some vibration noise and that's what took care of it

 

[wildbill34]

I felt the same after I got mine installed, but after shooting with some other people no one else could hear what I was hearing. I decided it wasn’t loud enough to matter.

 

[HuntInWild88]

It just sounds like the rest its self slaps down. Its not touching the riser and if you flick the arrow containment piece it sounds the same.

 

[doverpack12]

There are two screws on the bottom that control the stops for when it rises up and is pulled down. Replace the down screw with a nylon and some nylon washers to fine tune the bottom stopping point. Significantly decreases that noise. I did it 4-5 years ago so I don’t remember the screw size

 

[HuntInWild88]

There are two screws on the bottom that control the stops for when it rises up and is pulled down. Replace the down screw with a nylon and some nylon washers to fine tune the bottom stopping point. Significantly decreases that noise. I did it 4-5 years ago so I don’t remember the screw size

Awesome. I'll look into that for sure! Thank you

 

[Irishman12]

I have one of these rests in the mail now. I will have to make sure to look into this as well.

 

[devinhal]

The factory stop screw is an 8-32 x 7/16. So if you can find a 8-32 x 1/2, just adjust the effective length with a couple washers under it.

 

[Arctic Hunter]

If it’s a pinging sound it could be rest contact. I had to move the cord down the limb.