H4350 and compressed loads

[blacktailcentral]

Hello reloaders,
I am reloading 6.5 creed in a 20” tikka ctr with the 99gr hammer hunter and trying to get close to 3000fps. @45grains @2.78 coal im getting 2958fps also srp. Have you guys seen good groupings with compressed loads of H4350?

 

[wind gypsy]

I’d use a faster burning powder.

 

[blacktailcentral]

I’d use a faster burning powder.

H4350 shot great with the 147 eldm so figured i would start there. Maybe ill try N550 to get more speed.

 

[Bater]

Varget

 

[bhylton]

Having loaded several hammer bullets, they all required me to step up a 1 burn speed in powder to get results. For example: loading 270win H4831sc with Eldx but switched to H4350 to shoot hammers. If your compressed and not getting speed/pressure, stop and move to a faster powder

 

[blacktailcentral]

Varget

Loaded some up with varget will report back, appreciate the help!

 

[TripleOption]

I've shot H4350 compressed in my 6.5x47 with 153s and it hammers.

If you can shoot at safe pressure compressed, just make sure whatever load you use is far enough away from the compression point so you don't end up with some rounds that are marginally compressed and others that are uncompressed. That will make things shoot terribly.

 

[Andouille]

Are you using a funnel with drop tube? I can get about 10% more h4350 in a 300wsm case when using one. also makes for a more consistent level of compression if any still occurs.

 

[blacktailcentral]

Are you using a funnel with drop tube? I can get about 10% more h4350 in a 300wsm case when using one. also makes for a more consistent level of compression if any still occurs.

I have not been using one, thank you for this insight!