Giraud chamfer/deburr only

[leclairk]

Is it possible to only chamfer/deburr on Giraud without trimming case. I finally stepped up from a Frankfurd Arsenal case prep system. With that machine, I could run the case in the pilot if it needed to be trimmed, it would trim it, if it didn’t need trimming, it wouldn’t. After I ran it through the pilot I would chamfer/deburr and be on my way. I realize the Giraud does it in one step. With this new machine if it doesn’t need trimming, do I have to hand chamfer/deburr? I haven’t received the Giraud yet so I haven’t been able to play with it.

 

[bradb]

I think you could adjust the cutter. But I see no point. Worst that happens or only chamber deburs a tiny touch and just cleans up length a tiny. And if length doesn't need it it won't cut it.