Full Length Bushing Dies

[20DShar0]

What’s best full length bushing dies on the market?
I’m looking to get one for my 7 PRC.

 

[wapitibob]

I use the SAC for my 7PRC.
I may add their decapping mandrel as well, makes the entire process a single stroke operation.
I would get a set of Redding competition shell holders too; you only get 3 of the SAC .001 washers. The shell holders in the set are in .002 increments.

 

[streamerfish]

SAC
I may add their decapping mandrel as well, makes the entire process a single stroke operation.
I would get a set of Redding competition shell holders too; you only get 3 of the SAC .001 washers. The shell holders are in .002 increments.

This is probably the answer, I think SAC would get the most votes for high level shooters using that type of die.

 

[doverpack12]

The die that sizes all aspects of the case appropriately relative to fired brass in your chamber. Alex Wheeler has a YouTube video.
I can say Redding have not been good for WSM/PRC type cases that can have a base sizing issue.
Wilson have been good for those type of cases.
Micron generally sizes the base pretty tight.
Cortina also makes a base sizing die if that is a problem spot with the chosen die.

I do like the SAC bushings and go one size smaller than my measurements indicate

 

[Mike D Texas]

SAC
Micron
Cortina


Sent from my iPad using Tapatalk Pro

 

[Backcast88]

I am sure SAC and Cortina bushing dies are phenomenal.

I am a big Redding fan but my Redding Type S die was not very good with my 6.5 PRC, but the Forster FL bushing die was outstanding.

 

[Judd]

SAC
Micron
Cortina


Sent from my iPad using Tapatalk Pro

+ Whidden, Wilson, Harrells and Redding

Saying all of that, unless you're shooting some benchrest variation (including fclass aka belly benchrest) I'm not sure you'd ever shoot the difference between those with a hunting or PRS/NRL rig. The biggest factor in those games is being able to build a solid shooting platform.

 

[20DShar0]

Thanks for the information, I’m probably will end up going with the SAC