7 PRC Bushing Size? Adg Brass

[BRTreedogs]

I’d like to order my bushing with the dies etc.
What size bushing are people using for Redding type s , 7prc Adg Brass?


Thanks

 

[wildernessrimfab]

Im using a 311 bushing with ADG brass and a Redding Type S sizing die.
Loaded round is 0.3145 and I run a 0.2810 mandrel after sizing.

 

[jonnyviceroy]

311 bushing as well with a 21st century expander mandrel ran through the case afterwards. ADG brass but with Wilson bushing dies.

 

[Andouille]

I use 0.310 in an LE Wilson die for ADG brass, then run a polished LE expander mandrel to get about 0.0025" neck tension measured with a Burstfire gauge. 0.309" works better for Peterson brass which has thinner walls at the neck.

Edit: adding comment that bushings from LE, DAC, Redding, etc, will have different chamfer/lead in which may result in differing neck tension for the same given ID. LE Wilson is known for a short and sharper chamfer.