charliehorse27
Lil-Rokslider
Available for rent are complete kits to fix your 6.5 PRC, 300 PRC, or 7 PRC if you're dealing with the infamous 'clickers'. I started getting them on the second firing on one of my rifles, and fixed the other ones preemptively.
The fix is simple and removes about .003" of material at the .20" mark in the chamber. This allows the brass to expand enough that a reloading die can size it back down and it won't get stuck anymore. Otherwise, this area on the case is outside of the reach of the dies.
The how-to fix can be found here at Long Range Only:
The kit comes with the reamer of your choice, a t-handle, and cutting oil for $80 shipped to your door.
Feel free to PM me with questions.
The fix is simple and removes about .003" of material at the .20" mark in the chamber. This allows the brass to expand enough that a reloading die can size it back down and it won't get stuck anymore. Otherwise, this area on the case is outside of the reach of the dies.
The how-to fix can be found here at Long Range Only:
PRC SAAMI Chamber Issue - The JGS AW2 (Alex Wheeler) Finish Reamer Fix
Since I was taking my 300 PRC apart today I thought I would do a step by step, with pics, of how I use the JGS AW2 Reamer on a SAAMI chamber. The chamber on my rifle is already an AW2 chamber but this should help those with SAAMI chambers. This is the reamer. Thanks to Alex Wheeler for making...
www.longrangeonly.com
The kit comes with the reamer of your choice, a t-handle, and cutting oil for $80 shipped to your door.
Feel free to PM me with questions.
