Factory 6.5 147 Eldm Velocities

West2East

Lil-Rokslider
Joined
Aug 14, 2023
Messages
116
Location
West Oregon
I validated my velocity today at 700 yds.

Rifle: Tikka 6.5CM factory 24" barrel
Ammo: factory 147ELDM

I was hitting my waterline at 19.5 MOA(I Know "UsE miL, iT's EaSiEr"

I used Strelok and the Hornady app and adjusted my velocity until the adjustment matched and it gave me a velocity of 2560fps at the barrel. This seems super slow to me. Does anyone have some other data to share? I was really consistent with impacts on the waterline so I am confident in the come-up value.
Thanks

Sent from my SM-G975U using Tapatalk
 
I am pretty confident in all of my environmentals. I used a kestrel to find the temp and used a DA chart for Strelok. I started at 17.5 at first and saw low and walked it all the way up to 19.5 to where I was pretty centered on my hits on the waterline.
The hit on my finger was a hit on 19.25.Its a 12in plate.
Even my misses due to wind were right on the same elevation and I would correct left or right.
3d0a96836175281363543f89862b85d3.jpg


Sent from my SM-G975U using Tapatalk
 
Okay, thanks, so I'm not crazy haha. Box says 2695 and I started at 2640 but wasn't working. I have heard tikka barrels are slower but thats over 100fps so I figured I'd ask around.

Sent from my SM-G975U using Tapatalk
 
Okay, thanks, so I'm not crazy haha. Box says 2695 and I started at 2640 but wasn't working. I have heard tikka barrels are slower but thats over 100fps so I figured I'd ask around.

Sent from my SM-G975U using Tapatalk

It isn’t just Tikka, Hornady ELD-M ammo is often slow. Some lot#’s are faster, most are not.
 
I bought 300 rounds of the same lot # 147eldm ammo, it’s been a touch over 2600 since I’ve now got about 400 rounds on the barrel. A bit slower when the barrel was fresh.

24” tikka roughtech

These are shots from boxes #9-10

IMG_3034.png
 
Back
Top