Factory 1:7 Twist 223 Savage 110

I only just realized this was 1:7” with enough room in the mag for 80gr at least. Maybe this is of some interest to others here:


😀
This is my first post here, and this thread prompted me to sign up.

I can confirm it is indeed a 7 twist, and you can load out to ~2.400" OAL with the factory mags. 2.35-2.40" puts most varieties of ELDs right near the lands for me. Mine shoots quite well with N540 and 80gr ELD-m holding near MOA with the 80s loaded on a Dillon, with thrown charges (not trickled... fairly wide variations .2-.3). I recently fired a 10 shot .79 MOA group with that combo. I can hold MOA ish for ten rounds pretty consistently with that basic load. I didn't play with crazy case prep, or do much load development... just worked up to pressure and started shooting the gun. I need to put a little time into fine tuning the load, but it was new LC brass, BR4s, and a healthy charge of N540. 2775ish average from my gun. I think I can bump that speed up over 2800, but its enough velocity to still upset the ELDs to 500 yards, which is as far as I'd ever shoot an animal. It shot Hornady factory 73gr ELDs into similar groups. If 77 TMKs were not almost impossible to find right now, I'd be giving them a try, as I think they are likely more consistent, terminally, than the ELDm. I do have a few boxes of the 80 ELD-X to try... but ran out of time to get a load developed before hunting last fall.

I did swap the stock for one off another Savage (an Ultralite of some sort, IIRC)... the Houge is made of soft cheese or something, and flexes terribly, as noted in the article. I'd like to get a carbon fiber Stockys or something... but keep the weight down. Mine weighs ~9lbs all up with a 3-15 VX5 HD, bipod, sling, and suppressor.

I shot an okay 3x3 mule deer, and a cow elk with it last fall (two packouts in 5 days time was a workout). Had been a goal for about a year and half, to get a .223 set up and kill an elk with it. Mission accomplished.

I've been a .223 fan for a long time, and killed several deer and antelope with that caliber before this year (way back when folks still called ARs "poodle shooters")... but this year was the first time I attempted an elk. I will admit the ".223 for everything" thread influenced me a fair amount in the last year, though I have toyed with the idea of .223ing an elk for at least a decade.
 
Recent rockchuck victim and a couple ten round groups I've fired recently. This is about average for the load, I need to try some trickled charges and do some actual case prep. This was basically throwing new LC brass in my Dillon and doing near zero load tweaking/brass prep/"workup"... As much as I'd like to try 77 TMKs... its hard to argue with rockchuck headshots at 240 yards being a chip shot with my current 80gr ELDm load.

The suppressor is a YHM Turbo K... not light, but the gun shoots well with or without it.

aTnbkpWm.jpg
tAvx4etm.jpg
q0pvRmRm.jpg
 
I took advantage of the savage rebate last fall and went with a 110 trail hunter 223.
I wanted the 1-9 twist cuz 60 grain plenty to kill deer with and cheap plinking.
Magazine is cheap but has lots of room for longer bullets. Magazine works well enough if you work the action quickly. Slow don’t cut it especially with HP’s. Rifle shoots very well with my old eyes & old scope.
 
Back
Top