WTS Easton 5.0 Match Grade 300 Spine

CB4

WKR
Joined
Oct 10, 2018
Location
Iowa
I have 23 total shafts. Bow wouldn't tune with them, needing 250 spine.

They are cut at 26 3/4" carbon to carbon. Standard HIIT inserts are hot melted in.

Roughly 12 have never been shot.

$365 F&F (This includes shipping)

5.0.jpg5.02.jpg
 
Free bump:

If they were longer I'd buy them.

I know you didn't ask but why not turn down the poundage or lower the tip weight? At least grab a single 250 or 200 to test before you go all in. You might find out there's another variable in your setup.
 
Free bump:

If they were longer I'd buy them.

I know you didn't ask but why not turn down the poundage or lower the tip weight? At least grab a single 250 or 200 to test before you go all in. You might find out there's another variable in your setup.
I just like the way the 75lb holds and feels. I have the standard aluminum inserts in them which drops my point weight already from my standard set up. My total arrow weight with these fletched was 420 with 125 point. I couldn't imagine being below 400 for overall arrow weight by going down to a 100 grain point.
 
Standard inserts with the HIT collars or are they half-outs?

Which collars or total arrow weigh as shown?
Standard Inserts with the collars. As shown they should be around 295 grains. If you are interested feel free to send me a PM and I can confirm on my grain scale.
 
Back
Top