DT1 water bladder

[jm1607]

Do you guys run it in the sleeve in the bag or between the bag and frame?

If between the bag and frame, do you use the Kifaru bladder holder or just fasten it by itself?

 

[SHTF]

using DT2 but same principle applies I used the Sleeve inside the bag. I like it better as it keeps the water colder in my experience.

 

[jm1607]

using DT2 but same principle applies I used the Sleeve inside the bag. I like it better as it keeps the water colder in my experience.

I'm always just so scared it's going to break and get everything in may bag wet.. Hasn't happened but still scared

 

[7stw]

I'm always just so scared it's going to break and get everything in may bag wet.. Hasn't happened but still scared

I can tell you from experience when the elbow your tube threads in cracks ...... It really sucks. Glad I run a synthetic sleeping bag. As mine got soaked. And I was five miles in thankful for tenacious tape. Sealed it really well I was able to get bag dried out. (Since then use a dry bag for sleep system) and it wasn't that bad.

 

[JG358]

I throw mine in the slot pocket.

 

[ridgefire]

Sleeve in the bag

 

[SHTF]

I'm always just so scared it's going to break and get everything in may bag wet.. Hasn't happened but still scared

Get a gigerigg and you won't have to worry about it. Go on YouTube and see the abuse they put it through if you don't believe me. Not saying it's bullet proof but pretty close to it.

 

[AK Troutbum]

I throw mine in the slot pocket.

That's what I always did.

 

[tipsntails7]

I run it in the guide lid pocket, where the back pack straps stow. Keeps the weight of it up, when the bag is empty, and easy access if I need to get to it. If it leaks or breaks it's outside the pack.

I don't have a DT1 but I would run it the same way if I did.