Drop away; arrow jumps on draw

[BiG_Sea]

My 2019 Ripcord drop away has started jerking into place as I reach full draw. This last, quick movement causes the arrow to jump, making a clattering sound as it falls back to the rest. Wondering if others have seen this and if the fix is easy.

 

[Bump79]

Nock pinch is what is causing it, maybe not I guess it could be a rest issue.

 

[Bump79]

 

[dtrkyman]

Clean it with alcohol and see if it smooths up, are you cocking the rest prior to drawing?


Sent from my iPhone using Tapatalk

 

[dtrkyman]

Clean it with alcohol and see if it smooths up, are you cocking the rest prior to drawing?


Sent from my iPhone using Tapatalk

 

[BiG_Sea]

Clean it with alcohol and see if it smooths up, are you cocking the rest prior to drawing?


Sent from my iPhone using Tapatalk

Yep, it’s cocked before

 

[TylerDurden3]

A video would be helpful to see what’s going on. Could the cord have loosened or stretched causing the timing of the rest to be off?

 

[ATL]

To create slight downward pressure with the arrow on the rest, use a tied in bottom nock point only. Been doing this for 25 years, works great.

To quiet the contact between the arrow and rest, stick mole skin/felt where the two touch.