Do I need a rail with built in MOA?

[MHWASH]

I'm in the middle of a rifle build, Rem 700 in 280AI. I plan to shoot 180 ELDm @2800, hopefully. I currently have a Nightforce 4-14x50 that I plan on using. I now need a mounting system, but I'm unsure what to go with.
My plan is to shoot out to 1000.

 

[Marbles]

Probably not.

Plug in bullet and a conservative velocity estimate. See how much elevation you need in mils/MOA/Streck/whatever.

Find out the erector travel of your intended scope (look it up or dial from top to bottom) in the angular measure of your choice.

Divided the erector travel in half. Is that number larger than the elevation needed to get to your desired range? Throw in a bit of buffer.

For 1,000 yards with a 280AI, I would get a new scope if it doesn't have enough travel. My rifles have 20 MOA rails, not needed, but what is available with the other features I want. It shouldn't matter in your case with any decent scope (other than an S&B Klassik).

 

[wind gypsy]

180 ELD @ 2800 is probably around 24 MOA up at 1000 depending on atmospherics. You'd be getting a rail to get you near center of elevation travel @ 1000 yards. I'm not really aware of any scopes I'd use for shooting that far that would significantly benefit from the 20 MOA rail if not dialing in more elevation ever. But no issue if the rail you want has 20 MOA either.