Dialing in my bow help

[rspecht55]

Matthews Phase4 33
28.5 in draw length
60 pound draw weight
Easton axis 5.0 at 425 grains total
Hamakea rest
HHA single pin nytrx slider

Before I start I had everything paper tuned and set up with my archery shop. I am a novice when it comes to tuning.

Ok my windage on my site I have run out of room. My sight is partially covering the riser and in order to get all this to work my peep site is not aligned with my scope. I am having to compromise my peep visual to get my arrows on target. What are my next steps to get this right besides taking it to an archery shop?

When at the bow shop they moved top hats and everything to get me shooting through paper right.

Thanks for the help!


Sent from my iPhone using Tapatalk

 

[Mighty Mouse]

What's the centershot measurement of your rest (horizontal distance from center of rest fork to inside of riser)?

 

[rspecht55]

3/4 inch. This is probably my problem.


Sent from my iPhone using Tapatalk

 

[Wheels]

3/4 inch. This is probably my problem.


Sent from my iPhone using Tapatalk

You are only 1/16 off recommended, probably not the problem.