Dedicated heavy use AR can?

[83cj-7]

Okay so I shot my Spiro quite a bit. I shot it next to my Omega 300 and my friends Sandman X. This was on a 12.5” SBR. The Sprio is way quieter than the Omega and has way less back pressure. Recoil reduction is really amazing. The Sandman X was equally impressive. I’d say they both were nearly exactly the same from what the two of us could tell. Ejection was exactly the same on both and neither of us noticed any gas blowback in the face. Both the Spiro and the Sandman X are impressive.

 

[Braaap]

Okay so I shot my Spiro quite a bit. I shot it next to my Omega 300 and my friends Sandman X. This was on a 12.5” SBR. The Sprio is way quieter than the Omega and has way less back pressure. Recoil reduction is really amazing. The Sandman X was equally impressive. I’d say they both were nearly exactly the same from what the two of us could tell. Ejection was exactly the same on both and neither of us noticed any gas blowback in the face. Both the Spiro and the Sandman X are impressive.

Was the weight noticeable on the 12.5 or not too bad?

 

[83cj-7]

Well, considering my old Surefire suppressor and brake that I ran for 15 years weighed 23oz, the Spiro feels amazing.

 

[Braaap]

Well, considering my old Surefire suppressor and brake that I ran for 15 years weighed 23oz, the Spiro feels amazing.View attachment 1018544

Nice. Also I’m glad to see I’m not the only one that builds guns on the kitchen counter .

 

[Tanner]

I would look at an OCL polonium. They have a 6mm and a 30 cal model. Or something from the LPM anthem line-up. No experience with LPM but the OCL polonium with an adjustable gas block is very pleasant to shoot, and economical to boot.

I would not recommend a Polonium 30 for an AR. Great can but it is a gassy SOB on an AR.

 

[Ajsomp]

Haven’t tried it yet but got a new 16” 6arc upper this past weekend. I wanted to throw a suppressor on - turns out this OG fits perfectly. The upper has an adjustable gas block so I’m going to tune it no problem.

@Formidilosus I assume you’d approve. At least until I can figure out if the OCM6 would be a better option