WTS Custom Kimber Montana in 6x45

Status
Not open for further replies.

83cj-7

WKR
Rating - 100%
28   0   0
Joined
Dec 26, 2020
Messages
1,074
Location
West Virginia
This is simply one of the coolest rifles I’ve ever built but I’ve gone off the deep end with night vision and I’ve decided to let this go.

Rifle started as a Montana in .223. I ordered a Krieger 9 twist SS barrel and had my smith contour the barrel to my specs and finish at 20”. He also lengthened the mag box and modified the ejector for longer cartridges. The rifle is nearly flawless in every way. It feeds and ejects absolutely perfect.

The rifle is an absolute tack driver easily 1/4 MOA with three loads, all using the 87 V-max. I have lots of experience with this cartridge and the 87 V-max is simply the best for accuracy and terminal performance.

Rifle weighs 6lbs exactly bare and 7lbs 4oz exactly as pictured with Leupold FX3 6x42.

I will include 200 total pieces of once and twice fired, neck sized brass primed with WSR primers. Detailed load data provided to buyer.

$2200 plus shipping. Scope is not included in price but I could be talked out of it. I have several sets of 1” and 30mm Talley rings that are already coated to match rifle that I could include.

I can add more picture of groups if someone bumps this thread.
 

Attachments

  • IMG_2043.jpeg
    IMG_2043.jpeg
    292.6 KB · Views: 199
  • IMG_1956.jpeg
    IMG_1956.jpeg
    417.3 KB · Views: 172
  • IMG_2035.jpeg
    IMG_2035.jpeg
    529.3 KB · Views: 168
  • IMG_2036.jpeg
    IMG_2036.jpeg
    382.3 KB · Views: 170
  • IMG_2045.jpeg
    IMG_2045.jpeg
    148.9 KB · Views: 171
  • IMG_2037.jpeg
    IMG_2037.jpeg
    321 KB · Views: 167
  • IMG_2038.jpeg
    IMG_2038.jpeg
    160 KB · Views: 167
  • IMG_2039.jpeg
    IMG_2039.jpeg
    269.5 KB · Views: 166
  • IMG_2040.jpeg
    IMG_2040.jpeg
    361.4 KB · Views: 174
  • IMG_2042.jpeg
    IMG_2042.jpeg
    318.4 KB · Views: 195
Last edited:
OP
83cj-7

83cj-7

WKR
Rating - 100%
28   0   0
Joined
Dec 26, 2020
Messages
1,074
Location
West Virginia
Barrel is threaded 5/8-24.

Re-barrel was done by my local smith who has built me dozens of rifles. Everything else was done by me.

First three are at 300 yards
IMG_1998.jpegIMG_1995.jpegIMG_1996.jpeg

Hard to see, but 5 at 400 yards
IMG_0545.jpegIMG_1066.jpeg
This was 5 at 750 yards with a R to L wind
IMG_1142.jpeg
 

Elkbelter

Lil-Rokslider
Rating - 100%
3   0   0
Joined
Mar 28, 2016
Messages
191
To be sure this is a .223 necked up to 6mm.
Velocity with IMR3031 ?
Which powder for 2700FPS ?
 
Status
Not open for further replies.
Top