- Joined
- Sep 28, 2023
- Messages
- 662
I picked up the Renogy 72000 mAh battery and a DC/DC plug for an Airsense 10 based on the feedback in this thread. I've run it 3 nights now around 22 hours.
It shows 1 green spot next to the power button since it was charged and that hasn't changed.
It shows 3/4 blue spots and started 4/4.
Agree with the comments above on the LED's washing into the other spots. The 2nd button with the red LED's is mentioned in the crappy instructions but it doesn't tell you what the voltage ratings for each setting are. Also I noticed the blue LED spots are described backwards (or you're supposed to look from the flashlight side?).
I'm thinking it must be a knock off, but the hardware seems to hold a charge OK...for now.
It shows 1 green spot next to the power button since it was charged and that hasn't changed.
It shows 3/4 blue spots and started 4/4.
Agree with the comments above on the LED's washing into the other spots. The 2nd button with the red LED's is mentioned in the crappy instructions but it doesn't tell you what the voltage ratings for each setting are. Also I noticed the blue LED spots are described backwards (or you're supposed to look from the flashlight side?).
I'm thinking it must be a knock off, but the hardware seems to hold a charge OK...for now.