Compact Savage

MN_Condor

FNG
Joined
Mar 21, 2020
Messages
19
I grabbed a Savage from Cabela's one day, and didn't realize until much later that it was a compact, or youth model. It was my first rifle, and I didn't know any better. It's LOP is about 12.75", and my LOP is about 14.5", maybe a little less with a jacket on. I've looked into a new stock, but they are all significantly heavier. And I really like how lightweight this rifle is. What could I do to increase the length on my gun by about 1.5" without adding a lot of weight?
 

robtattoo

WKR
Joined
Mar 22, 2014
Messages
3,499
Location
Tullahoma, TN
Remove the recoil pad, add 3 layers of flip flop sole & reinstall the recoil pad with longer screws. It might add an ounce.
 
Joined
Sep 20, 2018
Messages
7,571
Location
In someone's favorite spot
Honestly, the plastic "tupperware" Savage stock is very, very light. Like 24 oz. or something. And it's not a bad stock. I shot plenty of MOA-sized groups at 300 yards with plastic Savage stocks without bedding them.

You can usually find one for about $60-70 on FeeBay
 

Apollo117

WKR
Joined
Jan 22, 2018
Messages
474
Check out https://www.gunpartscorp.com/. You should be able to find a either a synthetic or wooden stock for about $70.

You could create an alert on eBay for a replacement stock.

Lastly, you could post a WTB on the Savage Shooter's forum.
 

chefcreed

FNG
Joined
Feb 20, 2020
Messages
52
I put a recoil pad on a Howa Mini in youth stock only to add LOP. Works great and if one my kids want to shoot I’ll just take it off. It’s a cheap Bass Pro model and don’t have the measurements but if you like the rifle then it’s a easy relatively inexpensive solution.
 

Attachments

  • F7957654-917A-45CF-A121-293A708E7774.jpeg
    F7957654-917A-45CF-A121-293A708E7774.jpeg
    745 KB · Views: 17

TauPhi111

WKR
Joined
Sep 10, 2017
Messages
604
Location
Ohio
a couple things you could do:

1. Get a thick recoil pad. I believe you should be able to find 1.5 inch pads somewhere if not thicker.
2. remove the recoil pad and make a spacer to extend the stock to your desired length out of a light weight material. Finish it well and depending on how much you care about aesthetics, paint the whole stock with a tough epoxy base paint like Brownells Alumahyde.
3. Look for a light birch savage stock someone is selling. They can be pretty light and you can do some sanding/refinishing and wood removal to them to lighten them up even more.

Keep in mind that for shooting prone, sometimes having a rifle that is a bit shorter than your normal LOP is beneficial. You can shoot a shorter LOP effectively, but a longer LOP will break your shooting form.
 
OP
M

MN_Condor

FNG
Joined
Mar 21, 2020
Messages
19
I did wind up getting some spacers, just haven't put them on yet. I'll have to try shooting prone first. That might change things a bit.
 
Top