Choice Ammunition

Joined
Mar 14, 2013
Messages
1,358
Saw these guys online but haven't read much about them. They offer ammo in several different bullet types. Do any of you have experience with this brand? Any feedback?
 
I live in Missoula, so I went down to check them out. I had them shoot all of their 6.5 CM offerings and my tikka liked none of them, and then their ammo guy who did the shooting said that the problem was the gun, the scope, or the mounts. He couldn’t live with the fact that his loads didn’t shoot in my rifle.

I didn’t find them to be overly professional either.
 
I live in Missoula, so I went down to check them out. I had them shoot all of their 6.5 CM offerings and my tikka liked none of them, and then their ammo guy who did the shooting said that the problem was the gun, the scope, or the mounts. He couldn’t live with the fact that his loads didn’t shoot in my rifle.

I didn’t find them to be overly professional either.
Interesting
 
I'm also interested if anyone has any other experiences. I'm looking to purchase some 270 ammo loaded with 150 partitions and wanted something a little hotter than what Federal loads.
 
Saw these guys online but haven't read much about them. They offer ammo in several different bullet types. Do any of you have experience with this brand? Any feedback?
Long story but I ordered they billed my account, but I have never received my order. They have very poor commination. Best I can say is shop somewhere else.
 
I ordered some 6.5 prc ammo took couple months to get the order they didn’t have the brass not there fault I called and talked to someone he said the 156 probably wouldn’t shoot in my gun twist is to slow I just wanted to try the bullet before diving down the rabbit hole I also figured it wouldn’t shoot but wanted to try. Whatever he loaded shoots lights out it’s unbelievable how well it shot out of my gun
6bc2138cf41be1d7a4c7fc0e0dbd42ad.jpg



Sent from my iPhone using Tapatalk
 
I ordered some 6.5 prc ammo took couple months to get the order they didn’t have the brass not there fault I called and talked to someone he said the 156 probably wouldn’t shoot in my gun twist is to slow I just wanted to try the bullet before diving down the rabbit hole I also figured it wouldn’t shoot but wanted to try. Whatever he loaded shoots lights out it’s unbelievable how well it shot out of my gun
6bc2138cf41be1d7a4c7fc0e0dbd42ad.jpg



Sent from my iPhone using Tapatalk
Are those the 156?

Sent from my SM-G892A using Tapatalk
 
Do NOT buy this ammo. I lost a really nice buck because the primer in a 30 06 load did not fire. I wanted to send it back to Choice for them to review (and hopefully help their manufacturing) but they refuse to answer my calls or emails. Four calls and four emails to them so far with no response. Don't take the risk of this happening to you. Better to purchase tried and true ammo!
 

Attachments

  • IMG_0138.JPG
    IMG_0138.JPG
    115.9 KB · Views: 59
Found these guys online seems like they’re one of the few shops that have ammo in stock. Thought I would check to see what fellow roksliders had to say. Sad to hear they have less than stellar customer service. Unfortunately I’ll have to look somewhere else
 
Can’t say I was real impressed with the stuff I have seen from them. Seating depth and powder charges all over the place to the point where I pulled everything down and reused the components.
 
Interesting that they have such bad reviews, had I read this I wouldn't have purchased anything from them. I ordered 250 grain loads for my 35 Whelen from them earlier this month and they arrived in 9 days, all mic'd out consistently and shot well under an inch. Now I am curious so will have to inspect the primers and run them over the chronograph. So far I've been pleased with them though.

Edit/Update... I had a second box of the 250 grain loads for my Whelen, when I put the first round in the bolt was hard to close and when I pulled it back the bullet was left in the chamber and spilled powder into the action and magazine. I mike'd all the rounds and they were all consistently 3.41-3.43", well over the 3.34" overall length specified. Since I now have powder I just pulled the bullets and reloaded the cases. Lesson learned.
 
Last edited:
Interesting that they have such bad reviews, had I read this I wouldn't have purchased anything from them. I ordered 250 grain loads for my 35 Whelen from them earlier this month and they arrived in 9 days, all mic'd out consistently and shot well under an inch. Now I am curious so will have to inspect the primers and run them over the chronograph. So far I've been pleased with them though.

i bought five boxes of 180 grain TTSX for my 300wm and they are shooting okay but not great. Not sure how much of that is ammo and how much is shooter error. Every time I’ve shot I’ve been in a hurry. Last effort a week ago pictured below. Again not ideal, but certainly good enough to hunt with. Most recent grouping pictured below. Gun seemed to like off the shelf ammo a little better. Best seemed to be Hornady 180 super performance. Bergara Hunter71EFFDD5-AFE1-4385-9833-BFC356B551A5.jpeg gun.
 
Back
Top