Checking Cam Lean w/ Bowmar Nose Button

[cvanman]

I cannot check cam lean on my V3X due to the nose button. I marked my string with a sharpie and pushed the nose button up to the peep but it still wasn't enough room without the nose button deflecting an arrow to see if it crossed at my D-Loop.

I can check the lower cam lean no issue since there is no nose button on the lower part of the strength thank goodness.

My center shot is 15/16". I am trying to get it back into spec. I have checked my timing and it is good.

Any ideas? I don't have a spot hogg laser, but going to try to use a regular laser pointer in the cam/string channel.

Unless you guys say that won't produce accurate results.

Any ideas?

 

[Mighty Mouse]

15/16” centershot wouldn’t bother me personally if the bow is in tune. Assuming your bow is in tune and you’re just wanting to get the rest to the recommended 13/16” centershot, shift your rest 1/8” toward the riser and use top hats to shift your cams the same direction to compensate and maintain your tune. Checking cam lean via straight edge or laser doesn’t really tell you anything. How the arrow actually flies (as observed via paper, bareshaft, or broadhead tuning) is what matters.