Can I use a 6.5CM seater for other CM cartridges?

[MuleyFever]

I have seen guys use a 6.5PRC seater for 25PRC. If I wanted to reload for 25CM or 6CM could I use really any CM seater?

 

[jonnyviceroy]

Yes you just need to buy a new seating stem if you’re going to a smaller diameter with your current setup. I use my 6.5 prc dies for my 25 prc and just had to change my bushings in my sizer and stem in my seater. (Link for an example)

 

[T_Widdy]

Depends on the seater brand, style and also the ogive of the new bullet. Sometimes you can drill out the center of the seating stem so it is not contacting the tip and seats the bullet by contact of the ogive.