Bullet for whitetail deer from 6mm Creedmoor

Joined
Nov 4, 2022
Messages
41
Location
S. Central PA
Hunting in PA so nothing over 300 yds. Trying to decide between heavier (100+ gr) cup-and-core like Berger VLD/EH, ELD-X, etc. vs. lighter bonded bullet like partition, accubond, etc. What do you y'all think?
 

slatebuilder

Lil-Rokslider
Joined
Feb 17, 2020
Messages
177
We have killed a ton of deer with 6mm’s using 100 grain interlocks, 100 grain partitions, and 95 grain nosler ballistic tips. We also have some 70 grain hammers loaded to try now too.
 
Joined
Nov 30, 2022
Messages
707
I shot 3 does last year with 147 gr eldm out of my 6.5 cm last year all under 100 yards and all dropped in their tracks. I just built a 6 cm this year and planning to run the 108 eldm this year.
 

Long Cut

WKR
Joined
May 24, 2019
Messages
430
While not a 6mm, I’ve had fantastic results with the 140 grain Nosler Ballistic Tips in 6.5 Creed’s on multiple whitetails in Georgia.

It’s also my understanding that the 95 grain Ballistic Tip is THE Whitetail bullet for the .243 caliber.

That being said, I’d seriously look into a Ballistic Tip for the 6mm
 
Joined
Oct 19, 2012
Messages
1,830
Location
Western Montana
100 gr. or 95 gr. Nosler Partitions are classics and work great.

90 gr. Nosler E-tip is fantastic also. My son killed his first elk a large cow with ONE 90 gr. E-tip at 350 yards. Hit her tight behind the right shoulder and the bullet mushroomed well and exited the off side left shoulder. She staggered about 20 yards and dropped.

90 gr. Accubond. The Accubond is a great bullet.
 

ddowning

Lil-Rokslider
Joined
Jul 12, 2023
Messages
284
6 creed up close I would shoot 108 eldm factory. If you want to hand load there are a lot of good ones for close range. 95 sst and 95 bt are probably 2 of the best. I shot those all the time in a 9 twist 243. Also, Hornady 105 bthp kills well. We have used those to 680 yards on whitetails.
 
Top