WTS Brux 22-250 fast twist barrel R700

[Deucebump]

This is a SS 26” Brux barrel chambered in 22-250 with a 1: 6.5” twist, threaded for a Rem 700. Not sure what the exact contour is but it measures .832 at the muzzle. Round count is around 100. This was taken off a customers gun that decided to go a different direction. Could very easily be rechambered for a 22 Creed and perfect for the heaviest of bullets. $275 shipped

 

[Deucebump]

Bump

 

[Benchrest Braxton]

who chambered it? reamer specs? freebore?

 

[Deucebump]

I chambered it. Saami spec reamer, saami freebore.

 

[Benchrest Braxton]

I chambered it. Saami spec reamer, saami freebore.

would this fit a standard rem 700 factory tenon or does the factory tenon need trued up to match?

 

[Deucebump]

Will fit standard. I dont usually open up action threads unless a customer specifically asks for it. Im not 100% positive, but Im pretty sure this was mated with a ground factory recoil lug, probably around .186 thick. (Its been a year or 2 since he swapped this out) I can measure the tennon length if you want me to.