Bow accessories help

rackcity24

Lil-Rokslider
Joined
Oct 29, 2017
Messages
190
Location
north dakota
Hey guys, I purchased a new bow Hoyt Hyperforce. I love the bow, just looking for help on a way to quiet it down some. Any brands of silencer that anybody uses that they recommend?
 
OP
R

rackcity24

Lil-Rokslider
Joined
Oct 29, 2017
Messages
190
Location
north dakota
I'm shooting Easton FMJ Injections with a 330 spine as of now with just a 100 grain practice head. I don't know enough about bows to know what else I should try looking at or changing. Thanks for the replys.
 

Tilzbow

WKR
Joined
Dec 25, 2012
Messages
444
Location
Reno, NV
If you have a press, or access to one, add a Simms Everlast Leech to the bottom of the string halfway between the string stopper and the cam. If you don’t have a press, then tie in cat whiskers or install an Apex Gear Double Down Silencer in the same spot. You only need one in this spot and it’ll make a big difference. The early 2018 Hoyt bows didn’t come with this but they added them a few months after release so if your bow already has a string leech in this spot then check your cam timing timing and make sure all accessories are tight.
 

nexus

FNG
Joined
Mar 2, 2012
Messages
79
Assuming you already shoot an average to heavy weight arrow (>400 grains), I find with all of my Hoyts cam timing is everything for noise control. After that I place a small set of cat whiskers (1-1.5 inch diameter) on the string between the speed nocks and a single SIMS string leach into the lower portion of the control cable.
 
Last edited:
OP
R

rackcity24

Lil-Rokslider
Joined
Oct 29, 2017
Messages
190
Location
north dakota
Well returned the bow after only having it two weeks and got my money back. It was a good bow but not exactly what I wanted. Hopefully I can find what I want in these 2019 bows.
 
Top