Black Eagle Rampage- SS half outs or Fire Nock

[optimusprime]

Has anyone used the Rampage shafts with the stock SS half outs along with the Fire Nock SS half outs? Was there any improvement with durability?


Sent from my iPhone using Tapatalk

 

[Gumbo]

Never tried them, but I'd suggest going with Easton HITs instead of half outs. If you want to beef up the front end break off the HITs to 50gr (or don't) and use Iron Will 25gr collars.

 

[big44a4]

Or use the BE FOCOS system


Sent from my iPhone using Tapatalk

 

[Trial153]

Neither, I use HITs with footings. All half outs and outsert are the same they all will fail at somepoint if lateral force is applied to them

 

[backcountryshaffer]

I'm done with the half-outs. I've been using them for years and have a lot of failures. I want to try the HIT with the collar.

 

[Boxerboxer]

I had the half outs and had issues with them bending. I'm using the Day Six Centric halfout/footer system and have had good luck with it. I would think similar systems from other companies would work well too.

To be clear I have not tried the day six stuff with my Rampages, just with the day six arrows.

Sent from my Pixel 3 using Tapatalk

 

[optimusprime]

What footings and collars are y’all using?


Sent from my iPhone using Tapatalk

 

[TX_Diver]

Also interested in a HIT w/ footing.

Anyone have a link?

 

[Brendan]

Brass HIT with Iron Will Impact Collars.... I personally use a 125 grain practice head, then swap for a 100gr broadhead plus 25 grain collar.

The brass HIT is an Easton product, you can get them everywhere if they're in stock, and can choose either 50gr or 75gr with a break-off tab. If you want less weight, just use the standard HIT. I probably have a bunch of these lying around and I'm sure others do too because I use brass. Iron Will, I've used the collar on my Axis, but not on my rampage, so assuming they make the right size.