Bino Harness for Revic BR10 Gen2

[JStrong]

I'm planning on getting a pair of Revic BR10s. Seeing how small they are, I'm worried they will bounce around in my bino harness (Muley Freak Game Changer). I'm wondering if anybody has recommendations for harnesses for small binoculars. Thanks!

 

[gr8fuldoug]

It would be our pleasure to assist you with this. Please give a call, 516-217-1000, when you have the time. We have a couple of options that would work well

 

[Odd1out]

It would be our pleasure to assist you with this. Please give a call, 516-217-1000, when you have the time. We have a couple of options that would work well

You have any options that are fully enclosed without magnetics?

Sent from my SM-G986W using Tapatalk

 

[gr8fuldoug]

Yes we do

 

[Gila]

I received the Kuiu Pro G3 harness today for my BR10. The large size fits the BR10. Gunwerks suggest it. Waterproof and very lightweight. Comes with three pads that go inside on the bottom for fit. The BR10 fits perfectly with the thinnest pad. I bought the cellphone case which has two padded pockets. One for the phone and a smaller pocket for an extra battery. I took the shell carrier off the bottom and mounted the accessory pouch there for my glasses. Also has a web pouch in the back. Two small pouches on the side. Room enough for the WeatherFlow.

Marsupial has a similar product. With the Marsupial, you can mount a pistol holster on the bottom. I don’t think the marsupial is waterproof though nor can the fit be molded. Could be wrong.

 

[Odd1out]

I received the Kuiu Pro G3 harness today for my BR10. The large size fits the BR10. Gunwerks suggest it. Waterproof and very lightweight. Comes with three pads that go inside on the bottom for fit. The BR10 fits perfectly with the thinnest pad. I bought the cellphone case which has two padded pockets. One for the phone and a smaller pocket for an extra battery. I took the shell carrier off the bottom and mounted the accessory pouch there for my glasses. Also has a web pouch in the back. Two small pouches on the side. Room enough for the WeatherFlow.

Marsupial has a similar product. With the Marsupial, you can mount a pistol holster on the bottom. I don’t think the marsupial is waterproof though nor can the fit be molded. Could be wrong.

Is the front zip pouch usable? I had an older kuiu harness, and it had one that wasn't. I struggled to get anything in it.

Does look very similar to the kifaru setup I'm presently using though.

Sent from my SM-G986W using Tapatalk

 

[Gila]

Is the front zip pouch usable? I had an older kuiu harness, and it had one that wasn't. I struggled to get anything in it.

Does look very similar to the kifaru setup I'm presently using though.

Sent from my SM-G986W using Tapatalk

 

[Gila]

Side pouch, back pouch and bino fit.

 

[Odd1out]

The one left of your fingers

Sent from my SM-G986W using Tapatalk

 

[Gila]

Phone pouch is extra…fitting pads and shell carrier comes with and is installed on the bottom. Can get a camel that attaches to the back and a bear spray pouch.

 

[Gila]

Finished attaching all of the pouches…If you do get one, attaching the straps to the bino is a bit different. There is a different right and left strap. One is a female buckle clip. The other strap has a male buckle. You need to take the sliders and buckles off and then thread the entire strap through the eyehole on the binos. I adjusted the straps so that I could look up with the binos and not pull on the harness. I ended up with a tag end on the straps that I cut back to about 2 inches, cut and burned. Everyone is different though.

The Marsupial: https://www.marsupialgear.com/colle.../blemished-new-no-mag-enclosed-binocular-pack