Arrow setup

Day Six 250. 100gr centric. 100gr point. 4” Bohning wrap, 4 Fusion-X 2.75” in 2 degree. Deep Six nocks. Bh-100grain IW, 100 Rage NC.

606gr total out of 78.6# Prime CT9 30.5” @264fps.


Sent from my iPhone using Tapatalk
 
Day Six 350 w/ 50gr centric, 100 gr tip, 4x90 heat vanes, 7" wrap cut in half, & black eagle m nocks cut 26" carbon to carbon and drawing 27.5". Hunting w/ day six 100 gr, slick trick 100 gr standard, original 100 gr ulmer edge, and 1 3/8 grim reaper razorcut heads.
 
28.75" GT Kinetic Hunter 300, 20gn FACT weight on Accu-tough insert and 125gn head. 3 Blazers with aggressive helical and cheap lighted nocks. 515gn finished weight. Muzzy Phantom and Exodus full broadheads.
 
Black eagle rampage 300 spine,27.5 ,100 grain focus outsert, aae max stealth,firenock
And 100 grain exodus full broadhead
 
BE Renegade 250 27.5" , 56grain outsert, 50 grain weight, 125 tip. Still deciding on vanes but currently testing 4 AAE Pro Max & 4 3" VaneTecs. Roughly 550 all in at 290
 
28 inch carbon to carbon Victory VAP 250s. 110 grain Ethics post and sleeve system with 100 grain kudus and/or trypans. 5 inch flo orange wraps with 3 fletch max stealth right helical. Deep six nocks. 522 total grains.
 
29.5” Axis Match 260s, wrapped with 3 fletch max stealth, brass HIT insert 50, ironwill footers w/ s100 heads. Total arrow weight 580 grains.
 
What field points are you running with the Iron will collar? I'm setting up some FMJ's with the collar but not sure of which field tip is the correct diameter! Sweet set up too

5/16" tips work great, I'm running the Trophy Takers with o-ring groves and they are junk, the concept is cool and they don't rattle loose as much but I hit a rock with one and it damaged the collar because it broke right at the grove where it is machined out. If I remember next time I'm in a bow shop I will get some regular 5/16"ers
 
29 1/2” Easton Axis match grade, 50 grains of brass up front with a 4 fletch steering these meat middles. Comes in at ~505 grain total weight with a 100gr broadhead. Going to play around with lighted nocks in the very near future.
 
28” 5mm FMJ, 50gr Brass Insert, Right helical 3 fletch AAE Max Hunters, 100gr VPA non-vented. 503.5 total arrow weight
 
28.5 inch 5 mm FMJ, HITS, 3 blazer vanes, 125 he 3 blade VPA non vented. 300 spine. 515 gr finished weight.

Sent from my moto z3 using Tapatalk
 
Just got some victory TKO 300. 27.5 shaft length, the 95 grain outserts. 125 grain iron will bh. They are fun to play around with. They go almost to fletching in my target. The nocks that came with them are delicate. Broke 3 already.


Sent from my iPhone using Tapatalk
 
Ive got two.
Black eagle carnivour 250s, uncut, 42 gr brass insert,100 gr head, 4 fletch max stealth. 283 fps at 495 gr.
Day six 250s, 30.5 in, 100 gr coincentric, 100 gr head, 4 fletch max stealth. 620 gr at 261 fps.
 
28.25" 300 black eagle x impact, FOCUS aluminum with 20gr brass added to center pin, 125 gr iron wills and 1.5" sevr, 4 fletched with Q2i fusion 2,1". finished weight is right around 478gr. Shot one of these into cement the other day to test and the arrow itself did great but had a slight wobble to the outsert which is easy to unscrew and swap out.
 
Just got some victory TKO 300. 27.5 shaft length, the 95 grain outserts. 125 grain iron will bh. They are fun to play around with. They go almost to fletching in my target. The nocks that came with them are delicate. Broke 3 already.


Sent from my iPhone using Tapatalk

I took them out before I even shot them and installed Easton X nocks, IMO they are a much better nock.
 
Back
Top