Arca/Pic Rail compatibility with Gunwerks Elevate 2.0

[Willie IV]

I have the Elevate 2.0 on order and would like to use an arca/pic rail to mount. I'm told any picatinny mounts with a slot is causing issues with the bipod mounting lug when locked into position in that it doesn't have enough meat to clamp to, due to the slot. Who's had issues and is there a solution other than using just a standard picatinny rail mount without the arca rail combo? Arca/Pic rails I've considered are the SRS and the Peak 44. This is going on a Peak 44 Bastion stock. Thanks.

 

[Kimber7man]

I used the SRS, just need to make sure to attach the bar of the Elevate to the solid portion of the rail that doesn’t have cut outs so it gets full engagement. (Hope that explained it well enough)

 

[Willie IV]

I used the SRS, just need to make sure to attach the bar of the Elevate to the solid portion of the rail that doesn’t have cut outs so it gets full engagement. (Hope that explained it well enough)

This is from SRS website. Do you have a version that's different than what they are showing here? Or is this what you're using?

Sent from my SM-S901U using Tapatalk

 

[Kimber7man]

No I’m just using the SRS front pic rail, 3” long.

Looking at your pic I don’t think the Elevate will work, there’s too much open space on the pic rail section.

 

[IDElkmagnet]

I have the srs full length hunter rail that is a longer version of your picture. My gunwerks 2.0 dosent engage with the lugs on the pic rail. The GW 2.0 does have a clamp adjustment screw that I tightened down a little and the bipod now works fine on it without lug engagement.
Not Ideal but oh well.

 

[zrodwyo]

It hasn’t been an issue for me. I adjusted the clamp and haven’t noticed any slipping.