Anyone put a peak 44 stock on a Christensen?

[2Stamp]

Since this topic already exists, I'll add to it for anyone wanting to go this route. I just bedded a Peak 44 Bastion to my Ridgeline 280ai (FFT model).

Using a kitchen scale (so take it for what it is) weight wise the bare FFT stock is 19.25 ounces, the Bastion is 22.125 ounces. The barreled action with scope is 4 lbs 13.4 ounces.

I chose to use bottom metal stuff from Red Hawk Rifles. The bottom metal for this Bastion is 5.4 ounces while the FFT bottom metal is 4.6 ounces (I didn't weigh the actions bolts).


Overall I'm not increasing the weight of the FFT model by much (around 4 ounces), but I feel the shootability will be better. My gripe with the CA stock is its slick and the trigger reach, especially while prone, was uncomfortable to me.

 

[WesternHunter56]

View attachment 635909View attachment 635910

Here’s the two I have on hand. I can get more later. You will have to shave the stock for the bolt release.

Did you use the 700/universal stock inlet?

 

[axeforce6]

Did you use the 700/universal stock inlet?

Yes. When I ordered mine it was the only option offered. I believe mine was their 11th stock made. Still use it and it’s still my favorite sporter style stock.

 

[WesternHunter56]

Yes. When I ordered mine it was the only option offered. I believe mine was their 11th stock made. Still use it and it’s still my favorite sporter style stock.

You would happen to have any pictures of what that looks like would you?