Another 25cal TMK Thread

[Superior Gun Works]

I ran a wide window of seating depth on these to compare to what Ive seen on the 115tmk's. 30-210 in 30 jumps. Nearly identical results as seen with the littler 6mm stuff. 90-150 being where they showed the most consistency and stopped flinging stuff around...........Please dont attack me and this thread if yours shot somewhere else. Im just putting what ive been seeing out there for folks.

 

[Taudisio]

Initial push with powders. This rifle still likes what it likes powder wise and the TMK didnt change this. Just cause it hit the speed dont mean it will shoot that speed.

How did the staball 6.5 shoot? Velocity looks promising. My rifle should be done any day now. I need to start snagging a few pounds of various powders. I have 1000 of the 135’s sitting on my bench.

 

[Superior Gun Works]

How did the staball 6.5 shoot? Velocity looks promising. My rifle should be done any day now. I need to start snagging a few pounds of various powders. I have 1000 of the 135’s sitting on my bench.

My rifle wasn’t a fan. Kinda hucked them all over. BUT this one has preferred 570 with a can and 560 with a brake. It very well may do better. Although it was pretty cool with the 560 and the TMK this go round

 

[Superior Gun Works]

Ran the bigger charge weight with a 215 and it was pretty crappy. For the sake of science I added some seating depth to see if it would settle it down and poof happy as can be. 650yds
video on the instant gram @sgw_idaho

Pretty interesting to see it going from a 215 to a 210 I lost what turned out to be a 1/2gr of powders speed, but it shot better. Interesting enough I can keep accuracy and push harder with the 210 vs the 215 in this instance.
Either way the 135tmk has shot 4 consecutive and even different loads sub 1/2 moa at 650yds. Calling it good.

 

[Ryan Avery]

This is good shit Nick.. Don't let the pressure police get to ya.

 

[T_Widdy]

@Superior Gun Works do you have a good bc yet at the speeds your pushing them?

 

[glock233]

Just got 2000 pieces of 135 in. Tagging the thread.

 

[Superior Gun Works]

@Superior Gun Works do you have a good bc yet at the speeds your pushing them?

I used the advertised bc and it worked out about right.