Anarchy Broadheads

[Derek0525]

Anyone had a chance to use these on an animal? There aren't very many reviews on them but the reviews on them are good. I ended up buying a 4 pack of the 100gr 1 3/16.

 

[Danielboone]

I have not hunted with them yet, but got some 100 grain 1.5" heads and they look nice and are very high quality. Very sharp and flew good out to 40 with my FPs. I may just use them this year.

 

[PhillyB]

Anyone had a chance to use these on an animal? There aren't very many reviews on them but the reviews on them are good. I ended up buying a 4 pack of the 100gr 1 3/16.

Derek- Be sure to report back after you have shot them with your thoughts. I have been looking into them as well, just havent pulled the trigger on buying them

 

[quarbles]

have a 6 pack of 1.5" 125g coming right now. very excited about this tip......

 

[Derek0525]

I will let you know what I think I might do a penetration test through some MDF between them and a Solid broadhead.

 

[Derek0525]

Well got them in the mail Saturday they look well built I ordered the 1.5 too Friday just to see which I would like better so far they look like a nice head I will shoot them this week and let you know how they fly.

 

[PhillyB]

Well got them in the mail Saturday they look well built I ordered the 1.5 too Friday just to see which I would like better so far they look like a nice head I will shoot them this week and let you know how they fly.

Good to hear. I am interested in the followup on this. If you get a second, can you take some pics of the BH's next to a standard field point?

I am interested in a real life height to width comparison...

 

[Derek0525]

.

These are the 1 3/16 ones have not got the 1 1/2 yet should be here this week and I will take another pic of them to show the difference.

 

[Sunspot]

It looks like a trimmed down Helix to me.

 

[PhillyB]

View attachment 9069.
View attachment 9070
These are the 1 3/16 ones have not got the 1 1/2 yet should be here this week and I will take another pic of them to show the difference.

Holy smokes.... that lil dude is small!

Have you spin tested them yet?

 

[Derek0525]

Can't really spin test them on the counter and that's how I always checked cause they have that chisel tip. So far they fly good at 20yds that's all I can shoot at the house till this weekend when I can shoot a bit farther. One thing is they tear the crap out of a target pulling them out of my rhino block its bringing chunks out. So if you have a target with a replaceable center I would advise shooting at the center.

 

[PhillyB]

Can't really spin test them on the counter and that's how I always checked cause they have that chisel tip. So far they fly good at 20yds that's all I can shoot at the house till this weekend when I can shoot a bit farther. One thing is they tear the crap out of a target pulling them out of my rhino block its bringing chunks out. So if you have a target with a replaceable center I would advise shooting at the center.

Most heads fly good at 20 yds. I am interested in your results at 50, 60, 70 yds.

Thanks for keeping this updated... looking forward to what you find out at longer ranges.

 

[Derek0525]

Got the 1 1/2 today

 

[PhillyB]

How did you like the Solid Broadheads?

I have read good things about them. Were you just not a fan?

 

[Derek0525]

I actually have not got to use the solids yet on an animal I bought them after last season when the other broad heads I used on my elk kinda disappointed me. I will probably be carrying both the Solids and the Anarchy this year I have a Bear Elk and 2 deer tags to fill. The solids did fly well when I shot them last year at 60yds. I'm gonna grab a piece of 3/4 or 1 MDF tonight at work and shoot the anarchy and solids to see if one penetrates better than the other.

 

[Derek0525]

Well shot at 20yds through 1" MDF
The SOLID went 5 1/2"
Anarchy 1 1/2 went 9"
Anarchy 1 3/16 went 9 5/8"
All heads still looked new and were sharp. I will post how they fly at longer ranges tomorrow.

 

[Derek0525]

Finally got out to shoot only got in out to 50yds but they are hitting right where I want them too. Surprised the 1 1/2 were right there also.

 

[PhillyB]

Finally got out to shoot only got in out to 50yds but they are hitting right where I want them too. Surprised the 1 1/2 were right there also.

Good to hear... but you are making it tough on me. I am shooting slick tricks pretty well, but something keeps leading me back to these heads.

 

[Derek0525]

I have never used slick tricks but hear they are good I was in the market for a new head this year I used to use Rocky Mountain Blitz in the past and loved them tried Shuttle Ts last year wasn't too impressed with them when I shot my bull I guess it did the job though. Was gona use the solids But I came across these and they are local so figured I would give them try. Hopefully I can try them out on a Bear here in a few days

 

[OR Archer]

whats your bow set up?