All things .308 Win

[walkingduckwaterfowl]

This 16" factory barrel and this ammo get along fine but not great. Groups meet my standard (always under 1.5" for 10 shot strings) but I haven't had any fall under 1.2" yet as they frequently do with my 6.5 gamer gun or .223.

-J

Do you happen to recall what velocity you were getting?

 

[brolo]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.

165gr factory nosler accubond and 168gr sierra TMK handloads both shot 4-5” groups

155gr sierra TMK handload powder ladder shot nicely, everything inside the orange dot, no pressure signs up through book max

Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

 

[North of 60]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.

165gr factory nosler accubond and 168gr sierra TMK handloads both shot 4-5” groups

155gr sierra TMK handload powder ladder shot nicely, everything inside the orange dot, no pressure signs up through book max

Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

I was in a similar situation and happily got mine cut/threaded...the benefits of shooting suppressed far outweigh keeping an old rifle original unless it was a very rare and monetarily valuable rifle.

 

[Formidilosus]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.

165gr factory nosler accubond and 168gr sierra TMK handloads both shot 4-5” groups

155gr sierra TMK handload powder ladder shot nicely, everything inside the orange dot, no pressure signs up through book max

Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

Absolutely thread the barrel and hunt with it! That is a great rifle, from your dad- a good gunsmith (Mike at Alpine Rifles is one) can set back the rear sight and thread the muzzle easy. Could do a thread protector that matches the barrel as well.

 

[Steve300xcw]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.


Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

I'd use the thing as it is. Not everything needs suppressor's, turrets etc etc. Thats a classic rifle and was good enough for the old man. Leave er be

 

[BrowningGuy88]

I'd use the thing as it is. Not everything needs suppressor's, turrets etc etc. Thats a classic rifle and was good enough for the old man. Leave er be

Agreed


Sent from my iPhone using Tapatalk

 

[Steve O]

I'd use the thing as it is. Not everything needs suppressor's, turrets etc etc. Thats a classic rifle and was good enough for the old man. Leave er be

This 100%. That is one of the finest rifles made.

 

[Bluumoon]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.

165gr factory nosler accubond and 168gr sierra TMK handloads both shot 4-5” groups

155gr sierra TMK handload powder ladder shot nicely, everything inside the orange dot, no pressure signs up through book max

Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

Did you mark some of the bullet holes? Almost looks like some key holing?

 

[NWBLKTAIL]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.

165gr factory nosler accubond and 168gr sierra TMK handloads both shot 4-5” groups

155gr sierra TMK handload powder ladder shot nicely, everything inside the orange dot, no pressure signs up through book max

Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

That thing looks mint, I dont know if I would alter it. I do understand however wanting to make it more appealing to take out.

If you could live with it in its current condition though, I personally would not change a thing.

 

[brolo]

Did you mark some of the bullet holes? Almost looks like some key holing?

Nope, didn’t mark them. Even with the 1:12 twist, I was pretty surprised the 165ish gr bullets shot so poorly. The JBM stability calculator had them both >1.5, and my dad said it shot 180gr match kings really well.

 

[Wolfshead]

Dad recently gave me his pre-64 M70 featherweight 308, took it out to the range today.

165gr factory nosler accubond and 168gr sierra TMK handloads both shot 4-5” groups

155gr sierra TMK handload powder ladder shot nicely, everything inside the orange dot, no pressure signs up through book max

Real question now is what to do with it, keep it in the safe or put it to work. Practicing/hunting with a suppressor is so much more enjoyable, but I dont know if i want to cut and thread the barrel

Please, please, do NOT cut the barrel and suppress this rifle!
I believe that if you do, one day you will be very sorry you did.
Not everything needs to be suppressed.
This is a classic rifle and as time grows by there are less of them.
My Dad is gone now and to have his rifle as he had it is something that is irreplaceable.