Airlock Zero Gravity 30

[omicron1792]

Keep up the good work! Excited for what you have coming.

Regarding the braked suppressor, is it possible to have a hybrid that can go integrated vs removable? I can see value in both, depending on situation, and having the ability to go back and forth vs having 2 cans would be awesome!

I wonder if it’s because it’s 3d printed?

 

[Huntnpack 2]

@43.6N next pre-order will open on either 2/16 or 2/21. Open to feedback which people prefer.

Preference…… Earlier the better !! 2/16
@AirlockIndustries

 

[Geewhiz]

@AirlockIndustries if you are planning to open a preorder in the next 2-3 weeks for the 30, when will we be able to see specs and price?

 

[DroptineNW]

Having a removable end cap is a big one for me and I’m sure a lot of others. I’m part of “The poor”who want to be able to remove a brake on the end or not depending on rifle and caliber. Not a deal breaker but versatility and modularity is always a seller. Super excited for this can and further testing.

 

[SheepCrk]

@AirlockIndustries will the preorder info come through your newsletter registration?

 

[Rifleman86]

Now I can’t decide between a 30 cal and the 7mm… The can will mostly live on my 7 SAUM and/or 6.5 CM 95% of the time, but it would be nice to be able to throw it on my 30-06 as well, and those DB numbers are impressive!

 

[Geewhiz]

Now I can’t decide between a 30 cal and the 7mm… The can will mostly live on my 7 SAUM and/or 6.5 CM 95% of the time, but it would be nice to be able to throw it on my 30-06 as well, and those DB numbers are impressive!

Don't be a cheapskate and buy one of each. Think of the savings. Really its a savings of $400 since no tax stamp fees.

 

[Ucsdryder]

Don't be a cheapskate and buy one of each. Think of the savings. Really its a savings of $400 since no tax stamp fees.

Every time you buy a can you’re basically putting 200 dollars in your pocket. Is that what you’re saying?

 

[Rifleman86]

Every time you buy a can you’re basically putting 200 dollars in your pocket. Is that what you’re saying?

I don’t need any more justification (aka mental gymnastics) to spending money on gun stuff trust me!

 

[Geewhiz]

Every time you buy a can you’re basically putting 200 dollars in your pocket. Is that what you’re saying?

Here's the thing, you'd basically be losing money if you didn't buy them

 

[AirlockIndustries]

We are finalizing the print time for the 30, we will share pricing and all details this weekend.

 

[Captains1911]

Before I arrived, my friend had told me it was a Nomad LTi, but it turned out to be just a Nomad Ti.

So it was the older welded version of the Nomad, not the the newer 3D printed Ti XC, correct?

 

[Tahoe1305]

So it was the older welded version of the Nomad, not the the newer 3D printed Ti XC, correct?

And shorter. LTi is the ~9” can. Ti is ~7”.

LTi is about as quiet as a can can get outside of 338 10”+ cans.

 

[Captains1911]

And shorter. LTi is the ~9” can. Ti is ~7”.

LTi is about as quiet as a can can get outside of 338 10”+ cans.

Got it. Yeah I have a Ti XC and it's pretty impressive. That's why I'm lenaing towards a 6.5 ZG.

 

[Tahoe1305]

Got it. Yeah I have a Ti XC and it's pretty impressive. That's why I'm lenaing towards a 6.5 ZG.

Ti XC is closer to the LTi performance wise compared to the older Ti. But still not quite there.

I ordered a 6.5ZG after comparing to a handful of cans in person if that helps you any.

 

[Captains1911]

Ti XC is closer to the LTi performance wise compared to the older Ti. But still not quite there.

I ordered a 6.5ZG after comparing to a handful of cans in person if that helps you any.

All info helps. My primary use for a 6.5 can would be on my 16” 6.5 Grendel AR, which im currently running TBAC Ultra 5 on. I know the TBAC is pretty loud, but the 6.5 G isn’t a that high pressure of a cartridge either. Think the 6.5 ZG is still worth it for this application?

Also, I haven’t seen much if any info on the ZG cans in regards to backpressure, as I imagine most people are running them on bolt guns. My 6.5 G has adjustable gas so no issue there, but I also have an 18” .223 AR that I could run it on, that does not have adjustable gas. Any ideas on back pressure issues with these? The DA Nomad Ti XC isn’t bad at all with back pressure.

 

[Tahoe1305]

All info helps. My primary use for a 6.5 can would be on my 16” 6.5 Grendel AR, which im currently running TBAC Ultra 5 on. I know the TBAC is pretty loud, but the 6.5 G isn’t a that high pressure of a cartridge either. Think the 6.5 ZG is still worth it for this application?

Also, I haven’t seen much if any info on the ZG cans in regards to backpressure, as I imagine most people are running them on bolt guns. My 6.5 G has adjustable gas so no issue there, but I also have an 18” .223 AR that I could run it on, that does not have adjustable gas. Any ideas on back pressure issues with these? The DA Nomad Ti XC isn’t bad at all with back pressure.

IMO I think it would be perfect (minus doing rapid fire stuff). I have a Grendel as well I plan to run mine on (in addition to a few other cartridges).

I am not positive on its back pressure compared to others though. Didn’t notice anything with our testing because it was only bolt guns.

I have adjustable blocks as well and tune my guns for cans. That said there is still some back pressure. I haven’t seen a good solution for it completely.

It will be better in nearly all ways compared to U5.