Adjusting MOA for elevation

[Drewdog10]

Hi I’m new to hunting and longer range shots. I have my dope card and it goes out to about 700 yards. My range I go to is about 1500 ft elevation. My question is how do I adjust MOA on the spot if say I was shooting at 5k elevation on a cold bore shot for hunting? Because obviously my MOA adjustments won’t be the same with such a difference in elevation. Thank you


Sent from my iPhone using Tapatalk

 

[ID_Matt]

Few different ways I am aware of.

- make multiple dope cards for the different elevations or DA's that you hunt
- use a rangefinder that automatically compensates for it
- use an app that factors it in or manually input it (lot of people screenshot the dope chart and set it as there background for the environmental conditions they are hunting in)

 

[BBob]

Go back to whatever you used to calculate your range card at 1500 and enter 5K and print that card???
Also read up on density altitude.

Density Altitude In Shooter App?

Got out and shot yesterday for the first time since buying Shooter App. Would appreciate some feedback on if I'm doing this right or if I have an error somewhere. 6.5CM - 147 ELD-M - 2513 FPS MV (avg of 10 shots over a magentospeed at around 70 F) - 41.0gr H4350 - Starline Brass - CCI LRP...

rokslide.com

 

[Harvey_NW]

Easiest and most budget friendly option is to buy a rangefinder with a solver and onboard sensors (any of the Sig Sauer K series) and setup a profile with the specs from your rifle, and establish a valid zero and baseline.