7 SAW

806guns

FNG
Joined
Mar 24, 2024
Messages
96
162 gr eldm using 41-43 gr varget looks to be a pretty consistent turn key load. Looks like a lot of people are getting really low es and sd numbers with little effort.


Sent from my iPhone using Tapatalk
That's what I ran.
 
Joined
Apr 4, 2013
Messages
1,513
Location
Lakewood, CO
Anybody down to hook a brother up with a dummy round 162 eldm or 168 berger. I need one for a custom wilson seater die


Sent from my iPhone using Tapatalk
 
Joined
Aug 14, 2016
Messages
1,528
Location
Great Falls MT
Yall aren't helping me not rebarrel the daughters 6.5 Sig Cross to a saw... what's the difference between the SAW 2?
Straight jacket has the barrels...
 
Joined
Sep 11, 2017
Messages
1,419
Location
Bozeman, MT

ruger35

FNG
Joined
Oct 16, 2017
Messages
46
Location
LA
Yall aren't helping me not rebarrel the daughters 6.5 Sig Cross to a saw... what's the difference between the SAW 2?
Straight jacket has the barrels...
Actually just talked to Nick today cause I added a 7SAW barrel to my Cross order from them to tag along with the 6.5CM. Just waiting on the back ordered dies.
 

6.5Express

Lil-Rokslider
Joined
Mar 31, 2013
Messages
215
Location
WY
Loading a 139 lrx in my sons 7 saw. He shot a bull a few weeks ago at 390. Acted like he was hit by lightning.
 
Joined
Sep 11, 2017
Messages
1,419
Location
Bozeman, MT
I’ve been working with H4350, but wasn’t happy with groups. ES numbers were very good, several loads below 10. But couldn’t get below 1” groups, and had random fliers. Most groups were closer to 1 1/2”. I was getting “crunch” from compression starting at 45.5 grains, which was giving me 2625 fps. I think the compression was causing my issues, so I wanted to try a faster powder.

Got my hands on some Varget last night. Ran a quick pressure test at 42-43 grains. This was the group. Heavy bolt at 43 grains with a light ejector swipe. Ghost of an ejector mark at 42.5

20” Proof Barrel
Alpha Brass
Sierra 165 TGK
Fed 205M
.010 off Jam (Lands)

19ec14a6a92f5206fb1859788ecd3083.jpg


Needless to say, I think I’ll be able to find a load haha. I’ll do a quick Litz style seating depth test at 42gr, and should be done. (.010, .050, .090, .130) off Jam. 42gr gave me 2650 fps, with only 60 down the tube. Should speed up slightly


Sent from my iPhone using Tapatalk
 
Joined
Apr 4, 2013
Messages
1,513
Location
Lakewood, CO
Are you guys using the .311 bushing that comes with the redding FL die or a different size. And what size mandrel you running brass through?


Sent from my iPhone using Tapatalk
 
Joined
Sep 11, 2017
Messages
1,419
Location
Bozeman, MT
Are you guys using the .311 bushing that comes with the redding FL die or a different size. And what size mandrel you running brass through?


Sent from my iPhone using Tapatalk


I ended up with the .313 bushing. The .311 they sent measured .0045 less than my loaded brass OD. I was looking for .002 neck tension.


Sent from my iPhone using Tapatalk
 
Joined
Sep 11, 2017
Messages
1,419
Location
Bozeman, MT
3b9efa9c25de0aa5caced44e7cff394c.jpg

b3cb476644c1232c5760cbc18515b6b5.jpg

f748acc5667f0879371091757deaed49.jpg

75315fc408d7f62ed9fbfa5458558477.jpg

395 yard shot, STEEP uphill. Dead centered a rib on entry and on exit. Bullet was just under the offside hide. Mid ship, just behind the shoulder. Exit was high, just under backstraps due to extreme angle. He went about 100 yards and tipped over. Sierra 165 TGK @ 2675 MV.


Sent from my iPhone using Tapatalk
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,956
Location
WA
3b9efa9c25de0aa5caced44e7cff394c.jpg

b3cb476644c1232c5760cbc18515b6b5.jpg

f748acc5667f0879371091757deaed49.jpg

75315fc408d7f62ed9fbfa5458558477.jpg

395 yard shot, STEEP uphill. Dead centered a rib on entry and on exit. Bullet was just under the offside hide. Mid ship, just behind the shoulder. Exit was high, just under backstraps due to extreme angle. He went about 100 yards and tipped over. Sierra 165 TGK @ 2675 MV.


Sent from my iPhone using Tapatalk
Nice bull!! The TGK is a bit tough for my preference, I have ~400 of same lot if you like the performance and are interested.
 

MarkOrtiz

Lil-Rokslider
Joined
Dec 24, 2022
Messages
228
Location
Minden, NV
3b9efa9c25de0aa5caced44e7cff394c.jpg

b3cb476644c1232c5760cbc18515b6b5.jpg

f748acc5667f0879371091757deaed49.jpg

75315fc408d7f62ed9fbfa5458558477.jpg

395 yard shot, STEEP uphill. Dead centered a rib on entry and on exit. Bullet was just under the offside hide. Mid ship, just behind the shoulder. Exit was high, just under backstraps due to extreme angle. He went about 100 yards and tipped over. Sierra 165 TGK @ 2675 MV.


Sent from my iPhone using Tapatalk
Great bull! Thanks for sharing. The 7 SAW looks like it fills a nice little gap above 7mm-08.
 

inkedspot

Lil-Rokslider
Joined
Sep 21, 2022
Messages
116
Location
Texas
That is very encouraging!!! I have a barrel that I am going to try out in the upcoming months, very excited to see how it does.
 

Neilbob

FNG
Classified Approved
Joined
Feb 19, 2024
Messages
50
The 7 saw definitely looks interesting. Not sure if it would negate some of the benefits, but can you rechamber a factory 7mm08 barrel to a 7 saw? Like an AI chambering.
 
Joined
Dec 30, 2014
Messages
9,727
The 7 saw definitely looks interesting. Not sure if it would negate some of the benefits, but can you rechamber a factory 7mm08 barrel to a 7 saw? Like an AI chambering.

You would need to set the barrel back quite a bit. 7 SAW pushes the shoulder back when making it steeper than the standard 08 shoulder. It’s smaller than a 7/08.

6.5 creed - saw - 7/08
photo79051.jpg
 
Last edited:
Top