7 PRC LOADS WITH H1000

[cfuentes]

Hi guys,
I just got some matchkingx 175 to load for my prc. Does anyone have any good recipes with H1000 on these? How bout ELDXs?

 

[Bater]

Start around 63-64 and work up. You’ll likely max around 68+ depending on brass/chamber. FWIW standard LR have beaten out Magnum primers in a few barrels I’ve worked with.

 

[cfuentes]

Thanks for the reply! What you mean by beaten out magnum primers? LR primers shoot more consistent?

 

[Bater]

Thanks for the reply! What you mean by beaten out magnum primers? LR primers shoot more consistent?

Lower ES/SD and slightly higer vel before pressure

 

[Thinkingman]

Start around 63-64 and work up. You’ll likely max around 68+ depending on brass/chamber. FWIW standard LR have beaten out Magnum primers in a few barrels I’ve worked with.

We did exactly this on Saturday...Same powder and bullet, CCI LRM primers.
Federal brass.
We stopped at 67.5 not because we were getting pressure signs, but we had cautiously moved up the ladder.
We will load 68 and maybe a few small increments above.

 

[hunting1]

I have 1-rifle that likes 65-grs and another that runs hot at 68-grs.

 

[Thinkingman]

We did exactly this on Saturday...Same powder and bullet, CCI LRM primers.
Federal brass.
We stopped at 67.5 not because we were getting pressure signs, but we had cautiously moved up the ladder.
We will load 68 and maybe a few small increments above.

Correction: We were shooting 175 ELDX if that makes any difference