6mm Creed Rifle

I had two built off of Tikka actions and they are fantastic. Bartlein 20” 3B barrels, Tikka action, one in a Rokstok and another in a KRG Bravo. They’re fast, accurate… I can’t think of anything I’d change on them
 
I did mine a little different. Bought a fast twist .243 tikka. Then had the gun rechambered to 6CM. Was done for about $850. Then I put it in a stockys VG. And now I’m onto a XLR chassis but still in that original barrel. Shoots great still. But I’m only into it about 200 shots so far.
 
I just assembled mine. Tikka with a PVA 24" brux #4 in a Rokstok. 109 eldm cruising around 3k fps. Soft shooter. I think it's going to make a great mountain gun.
 
I've got a waypoint. Shoots great with factory 103 eld-x's. Zero feeding issues. Stock is a little heavy but very comfortable.
 
I put a PVA prefit on my tikka action. Shoots 3/4 10 round groups, so I’m very happy with it.

It’s a fun gun to shoot.


Sent from my iPhone using Tapatalk
 
I have a 243 AI Tikka in a Rokstok and a PH3 in 6.5 PRC. If the PH3 6CM would've arrived at my LGS first I would have bought that instead of the PRC. I struggle with which gun I would take as I love shooting both of them. I don't think you can go wrong either way. The Seekins is just a quicker way to get there and has more modularity in terms of cartridges/bolt faces.
 
I run an 18" for hunting and a 26" for PRS.

Shoot 108 Elite Hunters hunting and 115 Dtacs for PRS. A little over 40gr of H4350 for the 108s and 39.5gr with the 115s.

Vastly different setups but we will focus on the hunting rig. Zermatt Origin, Manners LRH, NX8 2.5x20, TT Special, and a Dilligent Wolfhunter on the end. Loads are with Peterson brass which tends to pressure out early compared to other load data so beware.
 
Did not like the Ruger American Predator in 6 Creed, factory ammo wouldn't feed reliably out of either style of magazine and Ruger refused to acknowledge the actual problem and do anything about it. Cartridge was awesome and super fun to shoot though.
My gen1 wouldn’t feed but mine was more the bullet getting stuck on the lands and binding up the bolt. Gun shot immaculate though.
 
I have a seekins that shoots great. I had trouble finding a factory sporter/hunting style rifle in 6 creed. I thought about the Marshall but I feel the price was too high.
I started acquiring parts and should have this put together in about 2 months total.
Kelbly lite
PBB .750 straight taper at 22” no flutes
AG privateer
Hawkins Hunter m5 BM
MDT polymer 3 round mag
TT primary trigger
Hawkins featherweight low rings
SWFA 3-15
Should be right at 8.25 lbs scoped.
Total cost will be about $2500
I already had the trigger, scope and magazine.
I almost went with the peak 44 black tooth stock that would have saved 1/2 lb but I’ve wanted to try the privateer for a while now.
 
Seekins PH2. Shoots lights out, can't imagine what I would gain with a more expensive rifle except I'd like a shorter barrel.
 
Back
Top