6mm Arc

Soon to be...whenever I get my action back and the post office finds the Peterson 6.5 grendel brass they supposedly delivered.
 
Tried a load the one guy used I duplicated his results now I'm just searching for powder. It seems ever powder for the 6 arc is a powder I am out of or don't have it at all.
Maybe things will loosen up by spring. I know wishful thinking.
 
Tried a load the one guy used I duplicated his results now I'm just searching for powder. It seems ever powder for the 6 arc is a powder I am out of or don't have it at all.
Maybe things will loosen up by spring. I know wishful thinking.
Like what?
 
Thats one I have but now I have to decide if I want to burn it up on load development or save it for what I purchased it for then again it's only a few grains per load. sooooooooooo what to do?
 
I purchased cfe 223 for the arc I was planning to build with the action I'm still waiting for. Measure 114 screwed me there. Anyway, I did the math and it was something in the area of 1800 rds for an 8lb jug at Max load. It's relatively cheap comparatively speaking and not super difficult to find.
 
Leverlution has been a good powder for me. Have a few to try in h322 and 223. I shoot light and fast.
 
So do I and I even called legacy back in October and was told they should be in stock by thanksgiving.
 
The 6mm ARC appears to be almost an exact copy of the benchrest cartridge, the 6mm PPC. I wonder if that load data would work? I've just checked the specs on both cartridges, there are only a few thousands of an inch differences.
I understand that they have different applications such as faster twist rate and heavier bullets, so haven't looked into it...might not be applicable.
 
Should have my Howa mini on Tuesday. have 200 Lapua 6.5 Grendel brass. 108 Elite hunters, 95 vld, 65 and 75gr vmax along with LVR, CFE223, 8208, AA2220 and likely a few other powders on hand that will work. Prairie dogs likely first on the hit list.
 
Back
Top