6mm ARC Temp Stable Powders

[TimberHunter]

Cold chamber is no different than cold ammo. Ambient air temps will affect ammo and the chamber the same.

Sorry thought I was responding to AlaskaRed in regards to the cold gun (chamber)


Sent from my iPhone using Tapatalk

 

[khuber84]

Sorry thought I was responding to AlaskaRed in regards to the cold gun (chamber)


Sent from my iPhone using Tapatalk

No worries. There are circumstances where a cold WET chamber, like frost, could very well cause velocity and pressure issues, but that's with moisture present. However in my experience and opinion, a cold dry chamber, has very little to no affect on velocity.

 

[KY_coop]

H4895 w/108's made a nice load for my 18" 6 arc. Varget didnt get the velocity or the accuracy I was hoping for. Ive got a few lbs of 8208 I'll have to try next

 

[HairyScandinavian]

H4895 w/108's made a nice load for my 18" 6 arc. Varget didnt get the velocity or the accuracy I was hoping for. Ive got a few lbs of 8208 I'll have to try next

Gas or bolt? I have an 18" gas and a 16" bolt and a couple lbs of H4895 but wasn't on my radar, was planning on Lever or CFE223 to start out with.

 

[KY_coop]

18" bolt. Lever definitely the fastest powder for me so far but didnt get immediate accuracy i was hoping for. Next loading will be to try xbr then tac then revisit lever later on.

 

[doverpack12]

I think I’m settled on H4985 with 108’s in a 16” UL Repeater. Have 10 loaded up to confirm. About replicates factory ELDM for me with better accuracy.

Lever is honing in on a load with 95 TMK have 10 loaded to confirm that as well. Haven’t seen much change in velocity yet due to temperature

 

[TimberHunter]

18" bolt. Lever definitely the fastest powder for me so far but didnt get immediate accuracy i was hoping for. Next loading will be to try xbr then tac then revisit lever later on.

Do you mind sharing what velocity you are seeing with H4895? And the charge weight?


Sent from my iPhone using Tapatalk

 

[KY_coop]

27.2gr 4895 gets me 2585fps. Im optimistic this barrel will speed up soon though. Although 2585 is perfectly fine for the hunting I will do with it.

 

[TimberHunter]

27.2gr 4895 gets me 2585fps. Im optimistic this barrel will speed up soon though. Although 2585 is perfectly fine for the hunting I will do with it.

Looking at Hornady day, they’re saying 2700 fps ish with that load. Take off 25 fps per inch of barrel and that takes you down to 2550 according to the math. Thanks for the validation


Sent from my iPhone using Tapatalk