6CM Build with Defiance AnTi X 75° Bolt

[Fever Buck]

Build list:

Defiance AnTi X SA 75°
NF NXS 2.5-10x
Hawkins Rings
Proof Sendero 18”
TBAC U7 Gen 2
MDT HNT 26 R700 SA
Trigger Tech Special Flat Trigger

7.8 lbs with scope, suppressor, and 3 rounds of 103 ELDX. Pretty excited about how it turned out.

 

[B_Reynolds_AK]

Put the MDT adjustable butt pad on and it transforms that stock.

 

[Fever Buck]

Put the MDT adjustable butt pad on and it transforms that stock.

Will take a look. Thanks.

 

[sierracharlie338]

Looks like a monster slayer! Not a cheap build but bet it’s worth every penny.

 

[Fever Buck]

Looks like a monster slayer! Not a cheap build but bet it’s worth every penny.

Thanks. Just bummed it wasn’t able to put it together before hunting season. Will have to wait until next Nov to chase anything with it.

 

[sierracharlie338]

Thanks. Just bummed it wasn’t able to put it together before hunting season. Will have to wait until next Nov to chase anything with it.

Man that’s sucks. I had that happen a couple years back with a custom I put together as well. It will be that much sweeter when you do though!

 

[Fever Buck]

Forgot to upload this as well but my 22” 7PRC (top) is almost the exact same length as my 18” 6CM (bottom) with a can. Pretty cool.

 

[passinggas33]

View attachment 972989
Forgot to upload this as well but my 22” 7PRC (top) is almost the exact same length as my 18” 6CM (bottom) with a can. Pretty cool.

Does your 7PRC have the MDT adjustable butt pad?

And what lens caps do you have on Nightforce?

 

[Fever Buck]

Does your 7PRC have the MDT adjustable butt pad?

And what lens caps do you have on Nightforce?

The 7PRC has extra squishy pad from OBI.

Lens Cap: https://aadmount.com/collections/flip-up-caps

Highly recommend the caps for Aadmount. They’re a little stiff and definitely make a sound when deployed but they’re built very solid and work well.

 

[MuleyFever]

Thanks. Just bummed it wasn’t able to put it together before hunting season. Will have to wait until next Nov to chase anything with it.

No coyotes where you live?

 

[huntnful]

How’s it shoot? My buddy just got that new 75 degree anti X and the bolt lift after firing is super stiff compared to the 90 degree models. But I definitely like the shorter bolt throw.

 

[Fever Buck]

No coyotes where you live?

That’s a good point. Never done it before. Maybe that’s a good excuse to go try.

 

[Fever Buck]

How’s it shoot? My buddy just got that new 75 degree anti X and the bolt lift after firing is super stiff compared to the 90 degree models. But I definitely like the shorter bolt throw.

Just picked it up yesterday but yes the bolt lift very stiff but only tested it on dry fires. Will have to test on live fire.

 

[huntnful]

Just picked it up yesterday but yes the bolt lift very stiff but only tested it on dry fires. Will have to test on live fire.

Oh sweet! Nice build man, I hope it hammers! What loads are you planning to shoot/test in it?

 

[Fever Buck]

Oh sweet! Nice build man, I hope it hammers! What loads are you planning to shoot/test in it?

Thanks man! Picked up 200 of the 103 ELDX for now but have been interested in the 95 TMK as well. Seems like all of the current TMK, ELDM and ELDX are all killers.

 

[Turkeygetpwnd38]

Really nice build, almost exactly what I would want if I ever jumped over to a chassis. Go shoot some predators… or squirrels? I’d be finding something!

 

[Fever Buck]

Thanks man. Yeah I’ll have to figure out some kind of opportunity

Really nice build, almost exactly what I would want if I ever jumped over to a chassis. Go shoot some predators… or squirrels? I’d be finding something

 

[khuber84]

Just picked it up yesterday but yes the bolt lift very stiff but only tested it on dry fires. Will have to test on live fire.

75° defiance with the 24# spring are ridiculous lift forces. I built a rifle off one for my chiropractor, ordered a nitride classic assuming 90° as nothing was stated. Ended up with a 75°, I swapped out the 24# spring with a 21# and it's a lot better. There's a guy by the name of Jim Konzal who takes the 75° bolt, does some work to make it feel way better. I just sent a 90° defiance classic bolt to him for his tunage. If there are any ignition issues I'll just switch back to the 24# spring.

 

[Fever Buck]

75° defiance with the 24# spring are ridiculous lift forces. I built a rifle off one for my chiropractor, ordered a nitride classic assuming 90° as nothing was stated. Ended up with a 75°, I swapped out the 24# spring with a 21# and it's a lot better. There's a guy by the name of Jim Konzal who takes the 75° bolt, does some work to make it feel way better. I just sent a 90° defiance classic bolt to him for his tunage. If there are any ignition issues I'll just switch back to the 24# spring.
View attachment 973980

thanks. I’ll have to check that out. Need to put some rounds through it first though.

 

[khuber84]

thanks. I’ll have to check that out. Need to put some rounds through it first though.

I put 180 rds through the 65prc build for my friend, 150 with original spring, 30 with 21# spring just to confirm velocity and ignition was the same. That 75° is a, well it's a beast in a not so good way......