6 X45 Anyone?

[Dryfly1]

Anyone here load for the 6 x 45 /6mm/223 ? I was gifted a Kimber Super America and I need some ammo.

Thanks
2Gbl

 

[fshaw]

Yes, but I load for whitetail hunting with 95-100 gr bullets. Does your Kimber have the twist for those bullets?

 

[Dryfly1]

Not sure of the twist but some handloaded 90 grain bullets came with the rifle. If you don't mind what is your brass prep routine. Are you just running 223 over the 6mm expander?

Thanks for your response
2Gbl

 

[Frozenlead]

Not sure of the twist but some handloaded 90 grain bullets came with the rifle. If you don't mind what is your brass prep routine. Are you just running 223 over the 6mm expander?

Thanks for your response
2Gbl

Check out Little Crow Gunworks “Poor man’s PPC” series on YouTube. It’s all about loading for the 6x45.

 

[gbflyer]

Not sure of the twist but some handloaded 90 grain bullets came with the rifle. If you don't mind what is your brass prep routine. Are you just running 223 over the 6mm expander?

Thanks for your response
2Gbl

Yes. Easy peasy.

 

[fshaw]

Yes on the single pass over the expander, as stated above. I’d recommend annealing the cases before you expand the necks, I ended with some split after a few firings on some I didn’t anneal.

 

[shmtastic]

H335 for 70+gr, I ran mostly AA2200 with 55/60gr. I tried lots of different bullets, but mainly stuck with H335 because it worked well across a wide range of bullet weights and I had a few jugs kicking around.